In this paper, we innovatively conduct a Porro prism-based beam pointing stability promotion technique research and realize a high-performance rod-type photonic crystal fiber-based chirped pulse amplification (CPA) system, mainly including a frequency-reduced all-fiber pre-amplification stage, photonic crystal rod-based main amplification stage, and 1600 lines/mm transmission grating-pair compressor. Laser output with average power of 50 W, repetition rates of 500 kHz, pulse energy of 100 μJ, pulse duration of 830 fs, beam quality of M2<1.3, power fluctuation of 0.55% root mean square, and beam pointing drift of 19 μrad/°C over 8 h is realized. The high-performance laser system has an enormous application potential in fundamental research and precision manufacturing fields.
As an emerging laser architecture, Mamyshev oscillators have great potential for high-average-power and large-pulse-energy ultrashort pulse generation and offer an excellent platform for exploring nonlinear dynamics arising from their high nonlinear phase accumulation ability. This study demonstrates various bound state solitons, including dual- and multi-pulse states, in a nonlinear enhanced Mamyshev laser in the 1 μm wavelength regime. Furthermore, harmonic mode-locking up to the seventh-order (∼116.88 MHz) with a signal-to-noise ratio (SNR) above 70 dB is achieved through intracavity nonlinear control, birefringence optimization, and careful gain management. To the best of our knowledge, this is the highest SNR obtained in a harmonically mode-locked Mamyshev laser. The realization of diverse bound state solitons evolving into harmonic mode-locking provides valuable insight into the nonlinear dynamics of Mamyshev lasers and stimulates the discovery of new phenomena to advance fundamental science and laser technology.
Ultrafast fiber lasers over gigahertz (GHz) repetition rates have attracted substantial attention due to their wide range of applications. Harmonic mode-locking (HML) is an effective method to scale the repetition rate to GHz level. Our study experimentally confirms the formation process and evolution of GHz harmonic pulses in an anomalous dispersion laser operated in L-band by adopting the emerging multimode inference-based hybrid-fiber modulation device while optimizing intra-cavity dispersion, nonlinearity, and pulse polarization. Our findings reveal that the GHz pulse formation undergoes three phases in sequence, namely a multiple-pulse soliton bunch in burst mode, conversion to an HML pulse, and formation of the GHz pulse train with equal periodic interval distributions. The combined effect of the nonlinear multimode interference on intra-cavity pulses in temporal, frequency, and space domains, including coherent mode superposition, spectral filtering, and mode selection in composite fiber structures, may be associated with high-order pulse splitting. The maximum repetition rate of the laser is as high as 1.112 GHz, corresponding to the 103rd harmonic of the fundamental frequency. These results contribute to understanding the nonlinear characteristics of multimode interference equivalent mode-locked devices and provide valuable reference for promoting the development of the high-repetition-rate laser sources with high performance, low cost, and simple manufacture.
28 February 2025 in High Power Laser Science and Engineering
The Mamyshev oscillator (MO) is well-known for its high modulation depth, which provides an excellent platform for achieving both high average power and short pulse durations. However, this characteristic typically limits the high-repetition-rate pulse generation. Herein, we construct an MO that achieves a gigahertz (GHz) repetition rate through harmonic mode-locking. The laser can reach up to the 93rd order, which corresponds to the repetition rate of 1.6 GHz. The maximum achieved output average power is 3 W at a repetition rate of 1.2 GHz (69th order), with the corresponding pulse duration compressed to 51 fs. To our knowledge, this is the first time that the GHz repetition rate in an MO has been obtained simultaneously with the recorded average power and pulse duration.
26 December 2024 in High Power Laser Science and Engineering
Mamyshev oscillators (MOs) exhibit the potential for generating high average power and ultrashort pulses. Herein, we construct an MO using flexible double-cladding ytterbium-fiber with a fusion-spliced-combiner pumped scheme. Consistent with the most reported research results, the offset filter separation significantly affects the pulse characteristics (spectrum, pulse duration, etc.). Notably, in comparison with red-shifting, blue-shifting the peak spectral emission of the grating filter relative to a constant central wavelength of the bandpass filter substantially enhances the laser output characteristics. This phenomenon, which has not been previously reported, results in an average power up to 2.23 W and a pulse duration as short as 49 fs. To our knowledge, this is the highest average power achieved in sub-50 fs pulse duration in the nonlinear polarization rotation-assisted mode-locked MO laser architecture. The presented technique offers unique scientific proof for developing ultrafast laser sources with higher average power and shorter pulse duration.
Dispersion management plays an important role in improving the output performance of a mode-locked fiber laser. Therefore, dispersion management is carried out by introducing the grating pair in our experiment. Through adjusting the distance between the grating pair, mode-locked pulses corresponding to different dispersion regimes can be realized, which typically range from soliton state in the anomalous dispersion regime to the dissipative soliton format in the normal dispersion regime. Furthermore, tunable spectrum distribution can be achieved by adjusting two intra-cavity polarization controllers. The proposed dispersion management method complements mode-locking techniques based on nonlinear multimode interference (NL-MMI). The laser can operate with self-start mode locking stably and is useful for practice applications.