The present study combines transmission electron microscopy (TEM/STEM) characterization with planar-impact testing to evaluate the geometry and effective individual strength of Ni3Al-based L12 precipitates in the four-component Ni-Al-Fe-Cr and five-component Ni-Al-Fe-Cr-Co alloys. After homogenization and quenching, both alloys retained an FCC matrix containing residual ordered L12 precipitates. Aging at 800 °C increased the microhardness and produced near-spherical precipitates with average diameters of 106.5 ± 6.5 nm in Ni-Al-Fe-Cr and 48.1 ± 2.5 nm in Ni-Al-Fe-Cr-Co. The elastic-precursor decay exponent decreased from 0.71 to 0.065 in the four-component alloy and from 0.48 to 0.04 in the five-component alloy after aging, consistent with a transition from phonon-drag-controlled dislocation motion to a thermally activated regime. The corresponding transition shear stresses were approximately 0.224 and 0.207 GPa. Combining these transition stresses with the measured precipitate geometry yielded effective precipitate-related obstacle strengths of 0.40 and 0.33 GPa, respectively. Together with the previously reported binary and ternary alloys, the results show that the individual precipitate strength decreases across the investigated compositional sequence, while simultaneous changes in precipitate density and spacing limit the variation in the transition stress. The combined impact-microscopy approach therefore separates the precipitate-controlled obstacle response from the integral microhardness response in these compositionally complex Ni-based alloys.