Optical fiber links have proven their powerful ability to transfer the ultrastable clock signals over a national and continental metrological optical network. In this Letter, we propose and demonstrate a new scheme that time and frequency signals are modulated on the same laser wavelength with phase and intensity modulation by an independent electro-optic modulator, respectively. Different wavelengths are used in two opposite directions to prevent Rayleigh scattering. The noise changes caused by the fluctuations of the transfer links are actively canceled at the local site by optical delay lines. Radio frequency with 1 GHz and time signal with one pulse per second (1 PPS) are transmitted over 110 km fiber spools. The experimental results demonstrate that frequency instabilities of at 1 s and at and time interval transfer of 1 PPS signal with sub-ps stability after 1000 s are obtained. This novel scheme offers advantages with respect to reduce the channel in the fiber network, and can keep the time and frequency signal free from interference with each other.
We analyze mutual alignment errors due to wave-front aberrations. To solve the central obscured problem, we introduce modified Zernike polynomials, which are a set of complete orthogonal polynomials. It is found that different aberrations have different effects on mutual alignment errors. Some aberrations influence only the line of sight, while some aberrations influence both the line of sight and the intensity distributions.
We propose an optically controlled phased array antenna (PAA) based on differential true time delay constructed optical beamforming network (OBFN). Differential true time delay is realized by stack integrated micro-optical components. Optically-controlled angle steering of radio frequency (RF) beams are realized and demonstrated by this configuration. Experimental results demonstrate that OBFN based PAA can accomplish RF-independent broadband beam steering without beam squint effect and can achieve continuous angle steering. In addition, multi-beams for different steering angles are acquired synchronously.
In this study, we experimentally showcase the microfiber evanescent‐field photothermal gas detection by exploiting all‐fiber MHz‐level frequency shift scheme. Based on the acousto‐optic interaction effect, the low‐frequency shifts of 0.9 MHz and 1.83 MHz can be obtained through the cyclic conversion between the transverse core modes LP 01 and LP 11 in the few‐mode fiber. Our proposed all‐fiber frequency shifters show flexible MHz‐level up(down) frequency shifts with superior sideband rejection ratio (over 40 dB) and low insertion loss (less than 1 dB). Furthermore, an all‐fiber heterodyne interferometric detection system is implemented by leveraging the above low‐frequency shifters, in which around 1‐μm‐diameter microfiber is investigated for photothermal gas detection. A pump‐probe configuration is employed to obtain the photothermal effect induced by the gas absorption of the modulated evanescent field. By demodulating the phase of the beat signal output by the interferometer, an equivalent detection limit (1 σ ) of 32 ppm and a response time of 22 s are achieved for ammonia, as well as 0.24 % instability within 48 pump cycles. Given its compact all‐fiber configuration and high sensitivity with fast response, the experimental results can pave the way for widespread applications like heterodyne detection, fiber optical sensors, and interplanetary coherent communications.
We propose a new method called modified optical scanning cryptography using Fresnel telescope imaging technique for encryption and decryption of remote objects. An image or object can be optically encrypted on the fly by Fresnel telescope scanning system together with an encryption key. For image decryption, the encrypted signals are received and processed with an optical coherent heterodyne detection system. The proposed method has strong performance through use of secure Fresnel telescope scanning with orthogonal polarized beams and efficient all-optical information processing. The validity of the proposed method is demonstrated by numerical simulations and experimental results.
An optical phase locking method based on direct phase control is proposed. The core of this method is to synchronize the carrier by directly changing the phase of the local beam. The corresponding experimental device and the supporting algorithm were configured to verify the feasibility of this method. Phase locking can be completed without cycle skipping, and the acquisition time is 530 ns. Without an optical preamplifier, a sensitivity of is obtained, and the bit error rate is for 2.5 Gbit/s binary phase-shift keying modulation. The measured standard deviation of the phase error is 5.2805°.