In response to the growing demand for fast-charging electric vehicles (EVs), this study presents a novel hybrid multimodule DC–DC converter based on the dual-active bridge (DAB) topology. The converter comprises eight modules divided into two groups: four Insulated-Gate Bipolar Transistor (IGBT) modules and four Metal–Semiconductor Field-Effect Transistor (MESFET) modules. The former handles high power with a low switching frequency, while the latter caters to lower power with a high switching frequency. This configuration leverages the strengths of both types of semiconductors, enhancing the converter’s power efficiency and density. To investigate the converter’s performance, a small-signal model is developed, alongside a control strategy to ensure uniform power sharing among the modules. The model is evaluated through simulation using MATLAB, which confirms the uniformity of the charging current provided to EV batteries. The results show an impressive power efficiency of 99.25% and a power density of 10.99 kW/L, achieved through the utilization of fast-switching MESFETs and the DAB topology. This research suggests that the hybrid multimodule DC–DC converter is a promising solution for fast-charging EVs, providing high efficiency, power density, and switching speed. Future studies could explore the incorporation of advanced wide bandgap devices to handle even larger power fractions.
Biometrics is the term for measuring human characteristics. If the term is divided into two parts, bio means life, and metric means measurement. The measurement of humans through different computational methods is performed to authorize a person. This measurement can be performed via a single biometric or by using a combination of different biometric traits. The combination of multiple biometrics is termed biometric fusion. It provides a reliable and secure authentication of a person at a higher accuracy. It has been introduced in the UIDIA framework in India (AADHAR: Association for Development and Health Action in Rural) and in different nations to figure out which biometric characteristics are suitable enough to authenticate the human identity. Fusion in biometric frameworks, especially FKP (finger–knuckle print) and iris, demonstrated to be a solid multimodal as a secure framework. The proposed approach demonstrates a proficient and strong multimodal biometric framework that utilizes FKP and iris as biometric modalities for authentication, utilizing scale-invariant feature transform (SIFT) and speeded up robust features (SURF). Log Gabor wavelet is utilized to extricate the iris feature set. From the extracted region, features are computed using principal component analysis (PCA). Both biometric modalities, FKP and iris, are combined at the match score level. The matching is performed using a neuro-fuzzy neural network classifier. The execution and accuracy of the proposed framework are tested on the open database Poly-U, CASIA, and an accuracy of 99.68% is achieved. The accuracy is higher compared to a single biometric. The neuro-fuzzy approach is also tested in comparison to other classifiers, and the accuracy is 98%. Therefore, the fusion mechanism implemented using a neuro-fuzzy classifier provides the best accuracy compared to other classifiers. The framework is implemented in MATLAB 7.10.
28 March 2022 in Journal of Electrical Engineering & Technology
This paper presents a mathematical model of 255 kW grid-connected solar photovoltaic (SPV) system. To study the performance characteristics of the grid-connected SPV system, a new hybrid adaptive grasshopper optimization algorithm with the recurrent neural network (AGO-RNN) control technique was implemented. Furthermore, the power quality at the point of common coupling (PCC) has been studied using the conventional (PSO) and proposed AGO-RNN controllers. The characteristics of the PV system were analyzed under varying environmental (variable irradiance and temperature) conditions considering 3 different cases such as (i) standard test conditions (STC), (ii) variable radiation with constant temperature, and (iii) variable radiation with variable temperature. For each case, the total harmonic distortion (THD) has been calculated using the proposed AGO-RNN control technique, and the results were compared with particle swarm optimization (PSO) technique. The 255 kW PV model is initially developed and connected to a three-level NPC inverter, an MPPT-based perturbation and observation algorithm. Later, the PV model is controlled by an AGO-RNN pulse width modulation (PWM) controller and is then integrated to the main grid at PCC. The main advantage of this technique is exploiting the separate DC-DC converter between the SPV module and the inverter. Finally, the proposed grid-connected SPV system was simulated on MATLAB for analyzing the performance of the system based on its I-V and P-V characteristics, inverter voltage, grid power, gird voltage, grid current, power factor, and THD under different environmental conditions. The simulation results demonstrate that the current magnitude and THD of the SPVGC system are improved with the cutting-edge AGO-RNN controller compared to PSO in all three different scenarios, and this value is less than 1.6%, which is within the permitted limits of IEC 61727 standards.
25 July 2023 in International Transactions on Electrical Energy Systems
In this research, a solar photovoltaic system with maximum power point tracking (MPPT) and battery storage is integrated into a grid-connected system using an improved three-level neutral-point-clamped (NPC) inverter. An NPC inverter with adjustable neutral-point clamping may achieve this result. To achieve this result, a modernized NPC inverter is used. Using the three-level vector modulation approach, the correct AC voltage may be generated when DC voltage conditions are present in an unbalanced situation involving an NPC inverter. A higher degree of precision is made possible by this. In-depth information on the many possible NPC inverter designs and modulation strategies was provided. By incorporating the necessary sophisticated algorithms into the NPC inverter, the necessary solar PV-MPPT functionality is made available, allowing for the regulation of power transfer among the solar PV system, the battery, and the grid. Modified INC method is proposed which has a tracking efficiency of 99.5% for varying irradiance. The use of sufficiently sophisticated algorithms makes this a reality. Using simulation with MATLAB/Simulink, we were able to examine an NPC inverter’s performance in several setups. Several amounts of solar irradiation were used to test the battery’s charging and discharging capabilities. The probe turned out to be fruitful. Laboratory testing ensures that the proposed method works by simulating real-world conditions.
Energy efficiency (EE) in the construction sector is crucial for sustainable development, particularly in emerging economies like Pakistan, where the industry accounts for a large share of energy consumption and environmental degradation. Despite its economic significance, Pakistan’s construction sector suffers from inefficiencies in energy use, with limited comprehensive assessments to guide improvements. This research introduces a novel, integrated approach combining Data Envelopment Analysis (DEA) and Tobit regression to evaluate and enhance EE in construction projects. DEA was applied to data from 120 construction firms, revealing an average technical efficiency (TE) of 84.4%, pure technical efficiency (PTE) of 93.2%, and scale efficiency (SE) of 90.4%, highlighting notable inefficiencies. The Tobit regression analysis identifies key factors influencing EE, including contractor training, access to loans, experience, and project site distance. This dual-method framework not only measures EE but also provides actionable insights to address inefficiencies, offering practical implications for policymakers and industry stakeholders. The findings emphasize the need for targeted interventions, such as government-supported financing and contractor training programs, to promote energy-efficient practices in Pakistan’s construction sector. This approach provides a replicable model for other developing economies seeking sustainable construction practices.