This paper investigates the formation tracking control of multiple agents with a double-integrator model and presents a novel distributed control framework composed of three items: a potential-based gradient term, a formation term, and a navigation term. Considering the practical situation, each agent is regarded as a rigid-body with a safe radius and a sensing region. To enable collision avoidance and connectivity maintenance among multiple agents, a new potential function with fewer parameters is established. The predetermined formation is also achieved by taking the difference between the actual displacement and the desired displacement as a consensus variable. Lastly, the virtual navigator provides trajectory signals and guides the multiple agent movement. Two instances of an equilateral triangle formation and a hexagonal formation are used in the simulation to verify the proposed method.
Lunar DRO pinpoint return is the final stage of manned deep space exploration via a lunar DRO station. A re-entry capsule suffers from complicated dynamic and thermal effects during an entire flight. The optimization of the lunar DRO return trajectory exhibits strong non-linearity. To obtain a global optimal return trajectory, an entire-flight lunar DRO pinpoint return model including a Moon–Earth transfer stage and an Earth atmosphere re-entry stage is constructed. A re-entry point on the atmosphere boundary is introduced to connect these two stages. Then, an entire-flight global optimization framework for lunar DRO pinpoint return is developed. The design of the entire-flight return trajectory is simplified as the optimization of the re-entry point. Moreover, to further improve the design efficiency, a rapid landing point prediction method for the Earth re-entry is developed based on a deep neural network. This predicting network maps the re-entry point in the atmosphere and the landing point on Earth with respect to optimal control re-entry trajectories. Numerical simulations validate the optimization accuracy and efficiency of the proposed methods. The entire-flight return trajectory achieves a high accuracy of the landing point and low fuel consumption.
2 June 2021 in The Journal of the Astronautical Sciences
An inter-satellite link is a key technology that improves control accuracy, transmission efficiency, and autonomous capability of constellations. A satellite’s pointing and tracking abilities mainly determine the inter-satellite link’s performance, which should be validated through an in-orbit test. However, during the construction of the constellation, the distribution of satellites does not satisfy the constraints of establishing the inter-satellite link. A test method for inter-satellite link pointing and tracking is developed with respect to a single satellite. A practical mission scenario for testing inter-satellite links’ performance is constructed. A virtual satellite is introduced as the target satellite to establish an inter-satellite link with the local satellite. The orbit of the virtual target satellite between two ground stations is characterized based on the Newton–Raphson method. By comparing the predicted and actual time differences between two ground stations receiving the signals from the local satellite, the inter-satellite link pointing and tracking abilities are evaluated independently. Numerical simulations verify the design of the virtual satellite. The single satellite test method for inter-satellite link pointing and tracking abilities is available.
1 October 2025 in Journal of Physics: Conference Series
Due to a high specific impulse, electric propulsion systems are equalled with by an increasing number of geostationary (GEO) satellites. During the on-orbit operation of the satellite, the errors of direction of the thruster, center of mass and corresponding inertial matrix results in the saturation of angular momentum. In order to reduce the load of the angular momentum, a joint identification method with respect to the thrust direction, center of mass and the inertial matrix is developed. First, a framework for multi-parameter joint identification is constructed based on a multi-level series least square approach. Measurement methods for multiple parameters are developed using recursive least squares filter. Then, identification methods for direction of the thruster, center of mass and inertial matrix of GEO satellite are developed. The thrust direction, center of mass and the inertial matrix are identified and corrected on-orbit successively. Numerical simulation shows that the joint identification method achieves high identification accuracies. The error of the thrust direction is less than 0.1°, the center of mass is less than 0.2 mm, the relative error of principal inertia is less than 0.2%, and the relative error of inertia product is less than 1.5%.
A Ganymede-synchronous frozen orbit around Europa provides a stable spatial geometry between a Europa probe and a Ganymede lander, which facilitates the observation of Ganymede and data transmission between probes. However, the third-body gravitation perturbation of Ganymede continues to accumulate and affect the long-term evolution of the Europa probe. In this paper, the relative orbit of Ganymede with respect to Europa is considered to accurately capture the perturbation potential. The orbital evolution behaviors of the Europa probe under the non-spherical gravitation of Europa and the third-body gravitation of Jupiter and Ganymede are studied based on a double-averaging framework. Then, the initial orbital conditions of the Ganymede-synchronous frozen orbit are developed. A station-keeping maneuver was performed to maintain the orbital elements to achieve the Ganymede-synchronous and frozen behaviors. A numerical simulation showed that the consumption for orbital maintenance is acceptable.