The study presents results of the characterization of Norway spruce (Picea abies Karst.) and fir (Abies alba Mill.) wood thermally modified by TERMOVUOTO® technology at temperatures in the range of 160 to 220°C in vacuum conditions. Sixteen thermo-vacuum treatment tests were carried out using a pilot laboratory unit on 30-mm-thick spruce and fir boards in various combinations of the process parameters, i.e. temperature ( T ), duration ( t), and pressure ( p ). The treated material was characterized to reveal the changes of the physical-mechanical properties including color and durability. The treated wood showed an improved performance with relation to the dimensional stability and durability. The measured mechanical properties did not show any significant decrease. Analytical models, based on the existing correlations between wood properties and process parameters, were assessed, thus allowing the control of the process.
In this study, an internal drying stress sensor was developed based on a silicon micromachined pressure gauge inserted in a cylindrical Teflon shell. Teflon provides protection and works as a medium between the gauge and wood. In this configuration, the pressure gauge has unidirectional, axis-selective sensitivity. When inserted in a drill hole at a given depth in the wood, the sensor can directly measure the compressive stress produced by shrinkage in the diameter of the hole. Based on research in the last 5 years, a preindustrial version has been developed that has been tested in laboratory drying experiments. Results show that the trend of the stress during the drying process can be visualized, and critical points can be determined such as stress reversal time and the effect of the conditioning phase on the internal stress. The sensors thus have potential to be used in the drying control on industrial scale once the remaining problems are solved.