Advanced Manufacturing Research Institute; National Institute of Advanced Industrial Science and Technology (AIST), 1-2-1 Namiki, Tsukuba, Ibaraki 305-8564, Japan
Dr. Takashi Nagoshi
Advanced Manufacturing Research Institute; National Institute of Advanced Industrial Science and Technology (AIST), 1-2-1 Namiki, Tsukuba, Ibaraki 305-8564, Japan
Hierarchical structures of 20 nm grains embedded with twins are realized in electrodeposited Au–Cu alloys. The electrodeposition method allows refinement of the average grain size to 20 nm order, and the alloying stabilizes the nanoscale grain structure. Au–Cu alloys are face-centered cubic (FCC) metals with low stacking fault energy that favors formation of growth twins. Due to the hierarchical structure, the Hall–Petch relationship is still observed when the crystalline size (average twin space) is refined to sub 10 nm region. The yield strength reaches 1.50 GPa in an electrodeposited Au–Cu alloy composed of 16.6 ± 1.1 nm grains and the average twin spacing at 4.7 nm.
In this work, micro-compression tests are performed at various temperatures with Ti-27Nb (at.%) single crystalline pillars to investigate anisotropic deformation behavior, including the shape memory effect. In non-tapered single-crystal pillars with loading directions parallel to [001], [011], and [111], transformation strain and stress show orientation dependence. [001]-oriented micropillars with aspect ratios of 2 and 1.5 demonstrate temperature-dependent transformation stress during micro-compression at various temperatures. Although more stress is required to induce martensite transformation in the pillar with the lower aspect ratio, the temperature dependence of ~1.8 MPa/K observed in both pillars is in good agreement with that of bulk Ti-27Nb.
Compression and tensile testing of electrodeposited nickel films with micro-sized specimens were reviewed. Preparation of micro-specimens without the tapering was realized by the micro-specimen fabrication method developed in our group. Accurate micro-testing method with precisely-shaped specimens is needed to reveal micro-mechanical properties of electrodeposited metals. The micro-testing on nanocrystalline nickel plated by an electrodeposition method with supercritical carbon dioxide showed remarkably high strength, and the strength increased with a decrease in the specimen size. The results indicated grain boundary mediated deformation of the electrodeposited nanocrystalline nickel.