The Dempster–Shafer evidence theory has been widely applied in multisensor information fusion. Nevertheless, illogical results may occur when fusing highly conflicting evidence. To solve this problem, a new method of the grouping of evidence is proposed in this paper. This method uses a combination of the belief entropy and the degree of conflict of the evidence as the judgment rule and divides the entire body of evidence into two separate groups. For the grouped evidence, both the credibility weighted factor based on the belief entropy function and the support weighted factor based on the Jousselme distance function are taken into consideration. The two determined weighted factors are integrated to adjust the evidence before applying the DS combination rule. Numerical examples are provided to demonstrate the theoretical feasibility and rationality of the proposed method. The fusion results indicate that the proposed method is more accurate than the compared algorithms in handling the paradoxes. A decision-making case analysis of the biological system is performed to validate the practical applicability of the proposed method. The results confirm that the proposed method has the highest belief degree of the target concentration (50.98%) and has superior accuracy compared to other related methods.
9 March 2020 in Mathematical Problems in Engineering
Elastic waves cause energy loss during the transmission of coal measures. These losses include propagation loss, dielectric absorption loss, scattering loss, and frequency migration loss. The absorption loss is mainly caused by the inelastic absorption. The scattering loss is caused by the uneven heat absorption in the formation. The frequency shift loss is caused by the piezoelectric effect of coal-bearing formations and the intermodulation of different frequency signals. After considering the influence factors of the coal seam structure, this paper presents a model of low-frequency elastic waves loss coefficient. The paper proposed the loss coefficient of the elastic wave in the coal measure strata by considering two main attenuation mechanisms: intrinsic absorption and scattering. This paper theoretically studied the effects of the model parameters such as density, porosity, particle size, and wave frequency on the loss of wave energy using COMSOL simulation. Besides, the comparison of MATLAB simulation results shows that the simulation results produced by the model proposed in this paper are similar to the models embedded in COMSOL. This work can be applied to coal, oil, and gas exploration and is also helpful to study the mechanisms of wave attention on the low-frequency band.
1 January 2021 in SCIENTIA SINICA Physica, Mechanica & Astronomica
This study investigates the mechanism of channel wave multipath propagation to determine features of a channel wave in a coal seam. For this purpose, deduction formulas were used for different time delays and propagation paths and, subsequently, a multipath fading channel wave pattern was built. MATLAB software was used to simulate the model. To this end, the characteristics of the coal seam and the surrounding rock were considered. The simulation results were compared with results obtained from the model contained in COMSOL software to verify the accuracy of the model. According to the results obtained from the simulation, the proposed model shows a good match with the COMSOL model, which is a common simulation comparison standard. In addition, the channel wave energy approximates to exponential decay at a constant distance from the source, and the multipath propagation considerably affects its energy attenuation. Furthermore, the multipath reflections’ travel time derivation is accomplished properly in the coal seam.
The characteristics of shocked nanocrystalline aluminum are investigated by using molecular dynamics method based on the embedded atom method potential function. The result presents the particle velocity profile and the width of shock front in detail. The simulated Hugoniot relations are basically consistent with the experimental data and other molecular dynamics results. The width of shock front decreases with the particle velocity exponentially.