During a hypothetical core-disruptive accident (CDA) in a sodium-cooled fast reactor (SFR), degraded core materials can form roughly conically-shaped debris beds over the core-support structure and/or in the lower inlet plenum of the reactor vessel from rapid quenching and fragmentation of the core material pool. However, coolant boiling may ultimately lead to leveling of the debris bed, which is crucial to the relocation of the molten core and heat-removal capability of the debris bed. To clarify the mechanisms underlying this self-leveling behavior, a large number of experiments were performed within a variety of conditions in recent years, under the constructive collaboration between the Japan Atomic Energy Agency (JAEA) and Kyushu University (Japan). The present contribution synthesizes and gives detailed comparative analyses of those experiments. Effects of various experimental parameters that may have potential influence on the leveling process, such as boiling mode, particle size, particle density, particle shape, bubbling rate, water depth and column geometry, were investigated, thus giving a large palette of favorable data for the better understanding of CDAs, and improved verifications of computer models developed in advanced fast reactor safety analysis codes

Studies on debris bed self-leveling behavior with non-spherical particles are crucial in the assessment of actual leveling behavior that could occur in core disruptive accident of sodium-cooled fast reactors. Although in our previous publications, a simple empirical model (based model), with its wide applicability confirmed over various experimental conditions, has been successfully advanced to predict the transient leveling behavior, up until now this model is restricted to calculations of debris bed of spherical particles. Focusing on this aspect, in this study a series of experiments using non-spherical particles was performed within a recently developed comparatively larger scale experimental facility. Based on the knowledge and data obtained, an extension scheme was suggested with the intention to extend the base model to cover the particle-shape influence. The proposed scheme principally consists of two parts – with one part for correcting the terminal velocity of a single non-spherical particle, which is the key parameter in our base model, and the other for representing the additional particle–particle interactions caused by the shape-related parameters. Through detailed analyses, it is found that by coupling this scheme, good agreement between experimental and predicted results can be achieved for both spherical and non-spherical particles given current range of experimental conditions.