Parameter variations pose an increasingly challenging threat to the CMOS technology scaling. Among the sources of variability, line-edge-roughness (LER) and random dopant (RD) fluctuations are significant in current technology nodes. In this paper, the impact of the LER and RD on the matching performance of FinFETs is investigated for the LSTP-32 nm node, where these devices represent an attractive alternative to the planar CMOS transistors. Line-edge-roughness contributions from the fin, top-, and side wall-gates of n- and p-channel FinFETs are compared by means of 2-D and 3-D technology computer-aided design (TCAD) simulations, performed with a quantum-corrected hydrodynamic model on large statistical ensembles. Correlations between geometrical roughness and resulting electrical parameters are analyzed to provide further insight into the impact of the LER. A noise analysis approach is adopted to evaluate the impact of RD fluctuations throughout the impurity concentration ranges of interest, providing a direct comparison with the line-edge-roughness contributions. The impact of the extension doping profile specifications on the LER- and RD-induced mismatch is investigated, highlighting the potential drawbacks of junction engineering.
Maintenance strategies such as condition-based maintenance and predictive maintenance of machines have gained importance in industrial automation firms as key concepts in Industry 4.0. As a result, online condition monitoring of electromechanical systems has become a crucial task in many industrial applications. Motor current signature analysis (MCSA) is an interesting noninvasive alternative to vibration analysis for the condition monitoring and fault diagnosis of mechanical systems driven by electric motors. The MCSA approach is based on the premise that faults in the mechanical load driven by the motor manifest as changes in the motor’s current behavior. This paper presents a novel data-driven, MCSA-based CM approach that exploits autoregressive (AR) spectral estimation. A multiresolution analysis of the raw motor currents is first performed using the discrete wavelet transform with Daubechies filters, enabling the separation of noise, disturbances, and variable torque effects from the current signals. AR spectral estimation is then applied to selected wavelet details to extract relevant features for fault diagnosis. In particular, a reference AR power spectral density (PSD) is estimated using data collected under healthy conditions. The AR PSD is then continuously or periodically updated with new data frames and compared to the reference PSD through the Symmetric Itakura–Saito spectral distance (SISSD). The SISSD, which serves as the health indicator, has proven capable of detecting fault occurrences through changes in the AR spectrum. The proposed procedure is tested on real data from two different scenarios: (i) an experimental in-house setup where data are collected during the execution of electric cam motion tasks (imbalance faults are emulated); (ii) the Korea Advanced Institute of Science and Technology testbed, whose data set is publicly available (bearing faults are considered). The results demonstrate the effectiveness of the method in both fault detection and isolation. In particular, the proposed health indicator exhibits strong detection capabilities, as its values under fault conditions exceed those under healthy conditions by one order of magnitude.
Condition monitoring (CM) is the basis of prognostics and health management (PHM), which is gaining more and more importance in the industrial world. CM, which refers to the tracking of industrial equipment’s state of health during operations, plays, in fact, a significant role in the reliability, safety, and efficiency of industrial operations. This paper proposes a data-driven CM approach based on the autoregressive (AR) modeling of the acquired sensor data and their analysis within frequency subbands. The number and size of the bands are determined with negligible human intervention, analyzing only the time–frequency representation of the signal of interest under normal system operating conditions. In particular, the approach exploits the synchrosqueezing transform to improve the signal energy distribution in the time–frequency plane, defining a multidimensional health indicator built on the basis of the AR power spectral density and the symmetric Itakura–Saito spectral distance. The described health indicator proved capable of detecting changes in the signal spectrum due to the occurrence of faults. After the initial definition of the bands and the calculation of the characteristics of the nominal AR spectrum, the procedure requires no further intervention and can be used for online condition monitoring and fault diagnosis. Since it is based on the comparison of spectra under different operating conditions, its applicability depends neither on the nature of the acquired signal nor on a specific system to be monitored. As an example, the effectiveness of the proposed method was favorably tested using real data available in the Case Western Reserve University (CWRU) Bearing Data Center, a widely known and used benchmark.
16 January 2024 in International Journal of Prognostics and Health Management
This paper addresses the problem of monitoring the state of health of electric motor driven mechanisms. The proposed condition monitoring procedure belongs to the data-driven methods and employs a combination of wavelet analysis and autoregressive model identification. It exploits the fact that the torque motor signal is a readily available measurement in industrial computers complying with the PLCOpen standard and how motion controllers execute electric cams. In particular, the torque provided by the PLC is represented as the sum between the ideal torque and an additional contribution that contains information about mechanism health condition. The procedure completely removes the ideal torque and analyzes the residual component to highlight and classify possible fault conditions. The described condition monitoring procedure is tested on real data in a laboratory setup.
A Micro-Opto-Mechanical-System (MOMS) based technology for the fabrication of Fabry-Perot interferometers on optical fiber is presented. Exploiting silicon micromachining techniques, the fabrication of ultrasonic receiver arrays suitable for wideband and high performance applications is demonstrated. Thanks to their high miniaturization level, the devices presented may be suited to minimally invasive endoscopic applications in medicine. The devices are based on the use of a SU-8 polymer interferometer manufactured on a micromachined silicon frame whose thickness can be modulated by the incoming ultrasound waves. In this way, the ultrasonic detection is performed by measuring the Fabry-Perot thickness modulation from the variation of the reflected intensity of a fiber-driven continuous laser beam hitting the interferometer.
4 March 2014 in IEEE Transactions on Signal Processing
Frequency warping has been introduced as a unitary operator over a nonfinite domain. In practical applications, the need of a feasible implementation forces to redefine frequency warping over finite domains in the framework of redundant transformations called frames, where the unitary property is replaced by the tight frame property, i.e., the adjoint operator behaves as pseudo-inverse. In case a tight frame cannot be designed, inversion can be achieved by finding the dual frame. In this work, with reference to nonsmooth warping functions, we present a new approach to the construction and fast computation of the dual frame operator based on an operator power series. With respect to previous approaches, many limitations are overcome while maintaining important properties of frequency warping.