Kannan Pauliah Nadar

Dr. Kannan Pauliah Nadar


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 November 2023 in ACS Omega
Verified
Journal Article
Open access
KNKannan Pauliah Nadar
Kannan Pauliah Nadar
VJVanitha Jeyaprakasam
Vanitha Jeyaprakasam
IMInbamalar Tharcis Mariapushpam
Inbamalar Tharcis Mariapushpam
CVChettiyar Vani Vivekanand
Chettiyar Vani Vivekanand
AEAnna Devi Eswaralingam
Anna Devi Eswaralingam
SGSaravanaram Gopalakrishnan
Saravanaram Gopalakrishnan
This study proposes an E-shaped microstrip patch antenna array (MSPAA). The substrate is RT/Duroid5880. Its 2.2 dielectric constant gives it a larger bandwidth than substrate materials with higher dielectric constants. The periphery dimension of a single E patch is 50 × 41 mm2. The areas of 2 × 2 and 3 × 3 MSPAAs are 120 × 96 and 180 × 144 mm2, respectively. Array members are 10 and 7 mm apart horizontally and vertically, respectively. MTM technology builds the projected MSPAA. This work looks at the effects of gain, reflection coefficient (return loss), directivity, bandwidth, and VSWR on proposed 2 × 2 and 3 × 3 MSPAAs with different patch lengths of 30, 40, and 60 mm, patch widths of 40, 50, and 60 mm, and substrate thicknesses of 0.8 and 1.6 mm. Also, this study compares the performance of existing E-shaped MSPAAs with proposed 2 × 2 and 3 × 3 MSPAAs. The suggested MSPAA performs better than the existing E-shaped MSPAA. The series network analyzer measures the prototype MSPAA's experimental outcomes. The polynomial is recommended for estimating the antenna array area with odd and even rows and columns. CST Studio Suite software analyzes and designs antenna arrays, and simulation findings are compared with hardware results. The main benefit of the proposed 2 × 2 MSPAA is that it reduces sidelobes. It has a gain of 8.9 dBi, a directivity of 8.95 dBi, a VSWR of 1.02, a return loss of -32.91 dB, and a bandwidth of 0.1 GHz at both 1.6 and 0.8 mm substrate material thicknesses. Across its operating range of 3.8-4.2 GHz, the recommended array antenna has a radiation gain of 7.01-7.81 dB and an efficiency of 68.51-71.11%. At 4 GHz, this study looks at how electronic steering affects the phase angle of the excitation signal, the number of elements, and the distance between elements in the beam steering linear phased antenna array (BSLPAA) using MATLAB.

1 January 2025 in International Journal of RF and Microwave Computer-Aided Engineering
Verified
Journal Article
Open access
SSS. Maria Seraphin Sujitha
S. Maria Seraphin Sujitha
KNKannan Pauliah Nadar
Kannan Pauliah Nadar
Wavelength division multiplexing (WDM) technology is widely used in high‐capacity optical communication systems, enabling the simultaneous transmission of multiple signals over optical fiber. However, signal attenuation and dispersion pose significant challenges to long‐distance optical transmission. To mitigate these effects, this study investigates the performance of a four‐channel dense wavelength division multiplexing (DWDM) network with and without the use of an erbium‐doped fiber amplifier (EDFA) and linear chirped fiber Bragg grating (LCFBG). In the absence of EDFA and LCFBG, the signal quality factor (QF) deteriorates as the bit rate increases, with a marked degradation at higher transmission speeds. Our results show that the introduction of EDFA significantly reduces the bit error rate (BER) and improves the QF. Moreover, combining EDFA with LCFBG provides superior performance, effectively compensating for dispersion and attenuation across various transmission distances (0.5, 1, 1.5, and 2 km) and data rates (2, 5, 8, 10, 15, and 20 Gbps). The combination of EDFA and LCFBG outperforms other configurations in terms of signal quality, with a notable improvement in the QF and overall system reliability. These findings suggest that the integrated use of EDFA and LCFBG is an effective solution for enhancing the performance of DWDM systems, especially for long‐haul, high‐capacity optical transmission.

17 June 2023 in Wireless Communications and Mobile Computing
Verified
Journal Article
Open access
PDF file
CVChettiyar Vani Vivekanand
Chettiyar Vani Vivekanand
TIT. M. Inbamalar
T. M. Inbamalar
KNKannan Pauliah Nadar
Kannan Pauliah Nadar
VKV. Kannagi
V. Kannagi
PDP. Arthi Devarani
P. Arthi Devarani
Wireless body area networks (WBAN) are becoming a promising solution for health care applications. WBAN allows monitoring of patients continuously in their own comfort zone. These devices use the industrial, scientific, and medical band (ISM) for communication. This band is overcrowded due to the increasing number of wireless medical devices and other wireless devices occupying this band. This causes interference, which can be damaging and could result in a change in received power. However, WBAN also needs minimum and reliable energy communication for a longer lifetime and improved quality of service. This work addresses both problems and proposes solutions for the same. A cognitive radio controller is employed as a centralized controller with dynamic spectrum allocation properties to mitigate the interference. The sensing of the spectrum is based on compressed sensing with a nonreconstruction model to save energy. To quantify interference measurement, the interference mitigation factor is introduced. Further, to increase energy efficiency, the K-means algorithm is used to cluster WBANs. However, critical emergency data and normal data are categorized as priority data and normal data, respectively, by the proposed priority scheduling algorithm. The performance of this cognitive radio-based system for telemedicine applications is analyzed through simulations. The simulations are performed using MATLAB 2019.

1 January 2024 in Journal of Sensors
Verified
Journal Article
Open access
SKS. Vadhana Kumari
S. Vadhana Kumari
SSS. Anslam Sibi
S. Anslam Sibi
SSShano Maria Selvan
Shano Maria Selvan
KNKannan Pauliah Nadar
Kannan Pauliah Nadar
The security and privacy of personal data have become a significant concern because of the vulnerability of wireless channels and the theft of sensitive information. Several security measures have been implemented in recent years to address this problem. Nevertheless, most protocols currently employed are insufficiently secure for mobile ad hoc networks (MANETs). This study introduces a routed tree optimization and trust value (RTO‐TV) technique to protect data transmission against black hole attacks in MANETs. This technique introduces a modified group optimization approach that enhances energy consumption by achieving efficient load‐balanced clustering, and presents an approach called RTO for selecting relay nodes (cluster heads [CH]). Additionally, a security method based on TVs has been suggested as a means of safeguarding against black hole attacks. The proposed RTO‐TV protocol was successfully implemented using an network simulator 2 (NS2) simulation tool. The comparative findings demonstrate that the proposed RTO‐TV method outperforms existing techniques in terms of delay, packet delivery ratio (PDR), energy consumption, detection rate, and throughput in the presence of a black hole attack.

28 March 2024 in EURASIP Journal on Wireless Communications and Networking
Verified
Journal Article
Open access
PDF file
AOAbdullahi Adan Omar
Abdullahi Adan Omar
KNKannan Pauliah Nadar
Kannan Pauliah Nadar
CVChettiyar Vani Vivekanand
Chettiyar Vani Vivekanand
EDE. Anna Devi
E. Anna Devi
AXA. Jasmine Xavier
A. Jasmine Xavier
JRJ. Binisha Rose
J. Binisha Rose
Communication services that are dependable are crucial, particularly during emergencies when the regular infrastructure for communication may be disrupted or nonexistent. In such situations, device-to-device (D2D) communication can be a helpful choice since it allows user equipment (UE) that is close to one another to connect directly, bypassing the cellular network infrastructure. The primary focus of this thesis is the application of D2D communication in a decentralized emergency scenario with a damaged eNodeB. The main objective is to find an appropriate strategy for finding and selecting D2D couples by simulating several methods in MATLAB. This study compares three D2D pair selection algorithms: distance-based, Signal-to-Interference and Noise Ratio (SINR)-based, and data rate-based distance-based. The simulation results show that the data rate-based strategy is the most effective method for selecting D2D couples in emergency scenarios. In contrast to algorithms that rely on distance and SINR, this one reduces the chance of an outage by 20%. Bit error rate (BER), capacity, spectral efficiency, and energy efficiency are the three types of links that are assessed: direct links, relay links, and UE relay links. The results show that, with the lowest BER and maximum data throughput, the direct link is the most reliable and efficient communication option. However, the relay connection and the UE relay link show better overall spectral efficiency in comparison to the direct link, indicating their ability to transport more data per unit of bandwidth. The option that consumes the least energy among the three is the direct link. The study demonstrates the great potential of D2D communication in emergency scenarios where conventional communication infrastructure may not be available. The direct link is the most dependable and effective alternative for communication, according to the data, although the UE link can still function effectively in the event that the direct link is compromised. The data rate-based method is a useful strategy for finding and choosing D2D partners. The results of this study can direct the development of D2D emergency communication solutions in 5G networks.

1 January 2022 in Wireless Communications and Mobile Computing
Verified
Journal Article
Open access
PDF file
JAJasmine Xavier A
Jasmine Xavier A
KNKannan Pauliah Nadar
Kannan Pauliah Nadar
This paper addresses the problem of exploring an unknown environment using multiple robots and maintaining the communication among the team of robots. The existing exploration methods assume that the communication is maintained among the team of robots throughout the exploration process. However, this is not possible when the area to be explored is very large and when there is limited communication range. The presented exploration methods provide communication maintenance among the team of robots and maintain coordination. Three different approaches are presented for exploration. They are centralized approach, leader‐follower approach, and ad hoc approach. The concept of centralized approach is developed where the base station is connected to all the robots in the team. The concept of leader‐follower approach is developed, where among the team of robots, a leader will be selected. The concept of ad hoc approach is developed in which even though the robots are not within the communication range of one another, communication will occur through ad hoc network. The performance evaluation is done for the above three approaches based on the path length, exploration time, and total number of cycles required to explore the complete area. Systematic approach is used to examine the effect of influence of the exploration parameters like the number of robots, communication range of a robot, and sensor range of a robot on the performance metrics. It is investigated that when there is increase in the exploration parameters, then the exploration time is reduced.