Motion Vector Estimation of a Stereovision Camera with Inertial Sensors: The aim of the presented work was the development of a tracking algorithm for a stereoscopic camera setup equipped with an additional inertial sensor. The input of the algorithm consists of the image sequence, angular velocity and linear acceleration vectors measured by the inertial sensor. The main assumption of the project was fusion of data streams from both sources to obtain more accurate ego-motion estimation. An electronic module for recording the inertial sensor data was built. Inertial measurements allowed a coarse estimation of the image motion field that has reduced its search range by standard image-based methods. Continuous tracking of the camera motion has been achieved (including moments of image information loss). Results of the presented study are being implemented in a currently developed obstacle avoidance system for visually impaired pedestrians.
1 December 2012 in Metrology and Measurement Systems
The article describes an application for calibration of a stereovision camera setup constructed for the needs of an electronic travel aid for the blind. The application can be used to calibrate any stereovision system consisting of two DirectShow compatible cameras using a reference checkerboard of known dimensions. A method for experimental verification of the correctness of the calibration is also presented. The developed software is intended for calibration of mobile stereovision systems that focus mainly on obstacle detection.
21 April 2021 in Metrology and Measurement Systems
The article presents a new technique for analyzing phenomena occurring during the measurement of the strength properties of paper in the conditions of compression of the tested samples with forces acting in the paper plane. The technique is based on collecting data on the current distance of the clamps holding the tested sample and the force exerted on the sample using a universal testing machine and on the simultaneous recording of image sequence of the sample during the measurement. Next, the resulting images are subjected to processing and analysis, the purpose of which is to extract information about the shape of the sample edge in all phases of the measurement. Its advantage is the ability to determine the deflection arrow of the sample and describe its shape using the selected function given by the analytical parametric formula. It will be helpful in further research on the development of an analytical model describing the phenomena occurring during paper compression, and a method to determine the mechanism of paper destruction and the corresponding maximum force that destroys a paper sample.
The article presents a proposal for optimizing the production process of corrugated cardboard based on measurements of process variables as well as the knowledge and skills of the operator conducting production. This technique involves continuous recording and analysis of process quantities that affect the quality of the produced cardboard. For this purpose, a network of temperature sensors with a system of continuous registration and monitoring of the process variables was designed and installed in the industrial environment of the corrugator. The recorded data is analyzed to estimate the desired values of the measured process variables, giving clues to how to control the production line. Unlike existing systems, the proposed algorithm for controlling production parameters allows each operator to use their preferred values for process variables independently of others. The proposed system allows for improving the quality of the produced cardboard and increasing the efficiency of its production by taking into account the individual experience and habits of the operator conducting production.