Passive localization of a sound source in the deep ocean is investigated in this study. The source can be localized by taking advantage of a cross-correlation function matching technique. When a two-sensor vertical array is used in the deep ocean, two types of side lobe curves appear in the ambiguity surface of the localization. The side lobe curves are analytically expressed and they are then used as indicators of the localization result instead of the scanning point with the maximum power. Simulation and experiment demonstrate the performance of the proposed passive localization method.
23 March 2015 in The Journal of the Acoustical Society of America
The localization of low-frequency coherent sources requires a proper aperture to ensure a high spatial resolution. Attaining a large aperture is difficult in practice when the conditions involved are limited. This letter investigated a compressive beamforming-based passive synthetic aperture approach with a reference sensor in a fixed position. Localization findings on acoustic sources in a semi-anechoic chamber were compared with conventional beamforming, compressive beamforming, passive synthetic aperture, and compressive beamforming-based passive synthetic aperture. Results suggest that the proposed method can produce a higher spatial resolution and higher detection ability than the others.
This paper presents a joint estimation method of source range and depth using a bottom-deployed vertical line array (VLA). The method utilizes the information on the arrival angle of direct (D) path in space domain and the interference characteristic of D and surface-reflected (SR) paths in frequency domain. The former is related to a ray tracing technique to backpropagate the rays and produces an ambiguity surface of source range. The latter utilizes Lloyd’s mirror principle to obtain an ambiguity surface of source depth. The acoustic transmission duct is the well-known reliable acoustic path (RAP). The ambiguity surface of the combined estimation is a dimensionless ad hoc function. Numerical efficiency and experimental verification show that the proposed method is a good candidate for initial coarse estimation of source position.