The paper presents a transformation of nonlinear electric circuit into linear one through changing coordinates (local diffeomorphism) with the use of closed feedback loop. The necessary conditions that must be fulfilled by nonlinear system to enable carrying out linearizing procedures are presented. Numerical solutions of state equations for the nonlinear system and equivalent linearized system are included.
This paper discusses the research and analysis of the dynamics of high-voltage generating systems. The test subject is an ignition system modelled by a set of two induction coils with an open ferromagnetic core that constitutes an ignition coil. The essence of the tests involved the application of magnetic coupling of the fractional order that enabled taking into account the non-idealities of the coils and the connector that implements the ignition point. The paper contains the results of a theoretical analysis, supported by digital simulations. The conducted experiments confirm the purposefulness of the conducted analyses and the possibility of modeling real objects based on circuits with fractional-order elements.
This paper presents the properties of fractional-order magnetic coupling. The difficulties connected with the analysis of two coils in dynamic states, resulting from the classical approach, provided motivation for studying the properties of fractional-order magnetic coupling. These difficulties arise from failure to comply with the commutation laws, i.e., a sudden power disappearance in the primary winding caused by a switch-mode power supply. Theoretically, under ideal conditions, a sudden power disappearance in the coil is, according to the classical method, manifested by a sudden voltage surge in the form of the Dirac delta function. As is well-known, it is difficult to obtain such ideal conditions in practice; the time of current disappearance does not equal zero due to the circuit breaker’s imperfection (even when electronic circuit breakers are used, the time equals several hundred nanoseconds). Furthermore, it is necessary to take into account phenomena occurring in real inductances, such as the skin effect, the influence of the ferromagnetic core and many other factors. It would be very difficult to model all these phenomena using classical differential calculus. The application of fractional-order differential calculus makes it possible to model them in a simple way by appropriate selection of coefficients and fractional-order derivatives. It should be mentioned that the analysis could be used, for example, in the case of high-voltage generation systems, including spark ignition systems of internal combustion engines. The use of fractional-order differential calculus will allow for more accurate modeling of phenomena occurring in such systems.
1 March 2016 in Bulletin Of The Polish Academy Of Sciences-Technical Sciences
In the paper, the analytical forms of fractional order derivatives of sinusoidal function according to definitions of Riemann - Liouville and Caputo are presented. To determine the analytical form of the integrals appearing in definitions of derivatives of fractional order the Lommel functions from hypergeometrical functions family were applied. With the use of properties of the derivatives of fractional order - differential-integral there were presented the conception of generalized element of a single equation, which depending on the value of the derivative order, can be inductor, resistor, capacitor, or a hypothetical element of a fractional order differential equation.
6 November 2018 in Mathematical Problems in Engineering
This paper addresses the problem of nonlinear electrical circuit input-output linearization. The transformation algorithms for linearization of nonlinear system through changing coordinates (local diffeomorphism) with the use of closed feedback loop together with the conditions necessary for linearization are presented. The linearization stages and the results of numerical simulations are discussed.