Aiming at the problems of punctuality, parking accuracy and energy saving of urban rail train operation, an intelligent control method for automatic train operation (ATO) based on deep Q network (DQN) is proposed. The train dynamics model is established under the condition of satisfying the safety principle and various constraints of automatic driving of urban rail train. Considering the transformation rules and sequences of working conditions between train stations, the agent in the DQN algorithm is used as the train controller to adjust the train automatic driving strategy in real time according to the train operating state and operating environment, and optimizes the generation of the train automatic driving curve. Taking the Beijing Yizhuang Subway line as an example, the simulation test results show that the DQN urban rail train control method reduces energy consumption by 12.32% compared with the traditional train PID control method, and improves the running punctuality and parking accuracy; at the same time, the DQN train automatically driving control method can adjust the train running state in real time and dynamically, and has good adaptability and robustness to the change of train running environment parameters.
This study introduces an integrated structural optimization design method based on a BP neural network and NSGA-II multi-objective genetic algorithm. Initially, a two-dimensional axisymmetric finite element model of the Giant Magnetostrictive Actuator (GMA) was established, and the coupling simulation of the electromagnetic field, structural field, and temperature field was conducted to obtain the GMA’s performance parameters. Subsequently, the structural parameters of the GMA magnetic circuit, including the magnetic conducting ring, magnetic conducting sidewall, magnetic conducting body, and coil, were used as inputs, and the axial magnetic induction intensity, uniformity of axial magnetic induction intensity, and coil loss on the Giant Magnetostrictive Material (GMM) rod were used as outputs to establish a back propagation (BP) neural network model. This model delineated the nonlinear relationship between structural parameters and performance parameters. Then, the BP-NSGA-II algorithm was applied to perform multi-objective optimization on the actuator’s structural parameters, resulting in a set of Pareto optimal non-dominated solutions, from which a set of optimal solutions was obtained using the entropy weight method. Finally, simulation analysis of this optimal solution was conducted, indicating that under a 5 A power supply excitation, the maximum axial magnetic induction intensity on the optimized GMM rod increased from 0.87 T to 1.12 T; the uniformity of axial magnetic induction intensity improved from 93.1% to 96.5%; and the coil loss decreased from 7.79 × 104 W/m3 to 4.97 × 104 W/m3. Based on the optimization results, a prototype actuator was produced, and the test results of the prototype’s output characteristics proved the feasibility of this optimization design method.
Combining the field condition with operation requirements in large-scale automated three-dimensional garage, a simulation system was developed by adopting configuration technique. Ant colony algorithm was utilized to assign berth address rationally. Configuration software was used for establishing simulation model and data dictionary. This simulation system mimicked the tasking process of three-dimensional garage. It also had the functions such as communication interface and database interface. Finally, it was tested and satisfactory results were obtained. When applied to the development and field training of relevant engineering project, this system can shorten project cycle effectively, lower costs and reduce impact in production and operation
31 August 2018 in IOP Conference Series: Materials Science and Engineering
Defect detection in rail fasteners constitutes a fundamental requirement for ensuring safe and reliable railway operations. Confronted with increasingly demanding inspection requirements of modern rail networks, traditional manual visual inspection methods have proven inadequate. To achieve accurate, efficient, and intelligent detection of rail fasteners, this paper presents an enhanced YOLOv5m-based defect detection model. Firstly, a dual-attention mechanism comprising Squeeze-and-Excitation and Coordinate Attention modules is employed to enhance the model. Secondly, the network architecture is redesigned by adopting MobileNetv3 as the backbone while incorporating structures with Ghost Shuffle Convolution (GSConv) modules and lightweight upsampling operators to reduce computational overhead. Finally, the original CIoU loss function in YOLOv5 is replaced with SIoU to accelerate convergence rate during training. Experimental results on a custom-built rail fastener dataset comprising 6500 images demonstrate that the enhanced model achieves 96.5% mAP and 17.9 FPS, surpassing the baseline by 3.1% and 2.1 FPS, respectively. Compared to existing detection models, this solution exhibits higher accuracy, faster inference, and lower memory consumption, providing critical technical support for edge deployment of rail fastener defect detection systems.