The scientific interest in Triply Periodic Minimal Surface (TPMS) lattices for thermal applications has grown exponentially in recent years, largely driven by the advances in additive manufacturing. However, the lack of a transparent and reproducible selection methodology in previously published reviews hinders the clarity and comparability of findings. This paper adopts and customizes the APISSER framework, a structured and repeatable method that guides literature reviews through five steps: defining research questions, identifying sources, screening studies, extracting data, and reporting results. This approach is applied to investigate the use of TPMS lattices in heat-transfer applications, including heat sinks and heat exchangers. The study covers 170 peer-reviewed journal articles from 2000 to 2024, analyzing key aspects such as application domain, topology, working fluid, flow regime, additive manufacturing method, and numerical modeling details. Results show a predominance of numerical studies, with the Gyroid and Diamond topologies being the most investigated. These structures are frequently modeled as porous media, especially for estimating pressure drops, although detailed thermal analysis often relies on full-resolution geometries. Water and air are the most common working fluids, while turbulence modeling remains limited to RANS approaches. The structured methodology adopted ensures high reproducibility and provides a quantitative foundation for addressing the identified knowledge gaps, guiding future experimental and computational research.
Reduced energy use and increased energy efficiency are essential for decarbonization and sustainable development. The food cold chain is a crucial infrastructure with high energy consumption and rising demand. A careful selection of technology used in food retail systems could result in long-term energy savings, functionality, ease of maintenance, and high energy efficiency. In this work, a comparison between the energy performance of three low-GWP refrigerants, namely, R-454C, R-449A, and R-744, is carried out with reference to an existing refrigerating system that serves a real supermarket. Energy usage and seasonal efficiency have been examined for three locations in Europe, representing mild and hot ambient temperatures. Results show that systems based on R-454C and R-449A perform significantly better than R-744 architectures, improving sCOP of up to +12% and +17%, respectively, with a simpler equipment design. This suggests that careful assessment is required to select the most appropriate refrigerant for each store size and climatic condition.
Water accumulation is a major problem in the flow assurance of gas pipelines. To limit liquid loading issues, deliquification by means of surfactant injection is a promising alternative to the consolidated mechanical methods. However, the macroscopic behavior of foam pipe flow in the presence of other phases has barely been explored. The goal of this work was to propose an approach to simulate air–water–foam flows in horizontal pipes using OLGA by Schlumberger, an industry standard tool for the transient simulation of multiphase flow. The simulation results were compared with experimental data for 60 mm and 30 mm ID (Inner Diameter) horizontal pipelines. Preliminary validation for two-phase air–water flow was carried out, which showed that correct flow pattern recognition is essential to accurately reproduce the experimental data. Then, stratified air–foam–water flows were investigated, assuming different models for the foam local velocity distribution. Foam rheology was considered through the Herschel–Bulkley model with the yield stress varying in time due to foam decay. The results showed good agreement for a uniform velocity profile and fresh foam properties in the case of the 60 mm ID pipeline, whereas for the 30 mm ID, which was characterized by significantly higher velocities, a linear velocity profile and 2000 s foam aging provided the best agreement. In both cases, the pressure gradient was overestimated, and the mean absolute prediction error ranged from about 5% to 30%.
25 September 2025 in International Journal of Refrigeration