A nanohybrid material containing carbon-supported molybdenum carbide and nitride nanoparticles of size ranging from 8 to 12 nm exhibits excellent HER catalytic activity. This molybdenum based catalyst (MoCat) is designed as a highly efficient, low-cost (precious-metal-free), highly stable electrocatalyst for water electrolysis in acidic media, and synthesized using a simple methodology. These nanoparticles (β-Mo2C and γ-Mo2N) were produced in situ using a metal precursor and C/N source via a controlled solid state reaction. An overpotential of 96 mV for driving a current density of 10 mA cm−2 was measured for the MoCat catalyst, which is very close to that of commercially available Pt/C catalysts (61 mV).
A simple and inexpensive synthesis route at relatively low temperatures (100 °C) and improved functional properties are reported for ZnCo2O4 nano-particles.
15 November 2021 in ACS Applied Materials & Interfaces
Natural fibrils derived from biomass were used as a template to synthesize uniformly decorated nanoparticles (10–12 nm) of molybdenum carbide (Mo2C) and molybdenum nitride (Mo2N) supported on carbon. The nanoparticles have been synthesized through the carburization and nitridation of molybdenum on cotton fibrils, using a high-temperature solid-state reaction. The catalyst exhibits an onset potential of 110 mV and an overpotential of 167 mV to derive a cathodic current density of 10 mA cm–2. The electrocatalyst also demonstrates excellent long-term durability of more than 2500 cycles in acidic media with a Tafel slope value of 62 mV dec–1.
16 December 2020 in ACS Applied Materials & Interfaces
Hydrogen is one of the cleanest forms of energy and can solve several issues, including environmental pollution and depletion of fossil fuels. The hydrogen evolution reaction (HER), being a carbon-neutral process, can reduce the amount of carbon in the earth's atmosphere. Molybdenum based solids are among the most popular electrocatalysts, and have been explored extensively for HER processes as an alternative to platinum. Herein, we report a nanostructured electrocatalyst (CuMoCat) consisting of molybdenum carbide, molybdenum nitride, and elemental copper, forming a heterojunction within the composite. Copper doping into a molybdenum carbide/nitride composite not only facilitates the lowering of the overpotential but also enables the catalyst to perform at high current density. CuMoCat exhibits an overpotential of 82 mV for attaining a current density of 10 mA cm−2 with a Tafel slope value of 33 mV dec−1 and shows excellent stability of 3000 cycles in acidic media. A theoretical study reveals that Cu doping brings a change in the electronic properties of the catalyst, which improves the overall adsorption and desorption of hydrogen on the catalyst surface during the hydrogen evolution reaction. The free energy diagram for the ‘Mo’ and ‘N’ hydrogen adsorption sites of CuMoCat shows a shift of free energy making these more favourable for the HER with respect to the Mo/N sites of the un-doped catalyst.