The welding experiments and numerical simulation analysis of dissimilar magnesium alloy AZ61-AM60 were carried out by TIG and A-TIG methods. The mathematical model of welding pool under three-dimensional transient moving heat source has been established, and the temperature field has been numerically simulated. The influence of welding process parameters on the surface forming quality of welded joints has been discussed. The simulation results show that temperature field distribution of dissimilar magnesium alloy AZ61-AM60 during the TIG welding process presents a certain asymmetry and the shape distribution of the melting field on both sides of the molten pool is asymmetrical. When A-TIG welding was coated with activating flux, the surface of the molten pool is ingot-shaped. These simulation results are verified through experiment investigation. The consistency between the experimental results and the simulation results reveals the variation law of temperature field and molten pool shape in the welding process, which provides an effective guidance for the optimization of welding process parameters of dissimilar magnesium alloys.
Scouring around the fixed foundations of offshore wind turbines (OWTs) remains a pressing concern within the offshore wind industry, significantly jeopardizing OWT safety. Despite previous efforts, the current understanding of this phenomenon remains incomplete, as various factors related to offshore wind farms and OWT operations can exert intricate influences. To further explore this matter, this paper undertakes a new study to further understand the interplay between monopile vibrations, tidal currents, and sea waves, elucidating their combined impact on scour surrounding an OWT’s foundation. It was found that, besides pile vibration amplitude and frequency, the pile vibration direction can also notably influence the scour around the monopile. Specifically, the most pronounced scour mostly transpires when the monopile undergoes vibrations along the 135° direction relative to the inflow direction. The mildest scour mostly occurs when the pile vibrates along the 90° direction. Additionally, this study reveals that different types of waves, indicated by the ratio of water depth, H, to wavelength, L, also engender varying scour around the monopile. The influence of waves on scour increases with the decrease in the H/L ratio, implying that OWT foundations are more threatened by shallow water waves than by deep water waves.
Offshore wind turbine monopile foundations are subjected to complex wind, wave, and flow coupling effects, which result in seabed scouring around the monopile. The consequent scour pits threaten the reliability, safety, and load-carrying capacity of the monopile. In order to develop a cost-effective measure to mitigate such an issue, a new countermeasure device, named “fishnet”, is studied in this paper using a combined approach of numerical simulations and experimental tests. In the research, the size of the fishnet, diameter of the fishnet thread, and the installation height of the fishnet were optimized in order to achieve the best protection to the monopile foundation. In the paper, both numerical simulations and laboratory tests proved the effectiveness of the proposed “fishnet” in reducing the scour around the wind turbine monopile foundations. Moreover, its contribution to erosion reduction can be further enhanced via optimization. It was found that, after optimization, the maximum shear force on the seabed could be reduced by 14% in the numerical study, and the maximum depth of the scour pit could be reduced by 38.2% in laboratory tests.
Magnetoelectric (ME) laminated composites with strong ME coupling are becoming increasingly prevalent in the electron device field. In this paper, an enhancement of the ME coupling effect via transition-layer implantation for co-fired lead-free laminated composite (80Bi0.5Na0.5TiO3-20Bi0.5K0.5TiO3)/(Ni0.8Zn0.2)Fe2O4 (BNKT/NZFO) was demonstrated. A transition layer composed of particulate ME composite 0.5BNKT-0.5NZFO was introduced between the BNKT piezoelectric layer and the NZFO magnetostrictive layer, effectively connecting the two-phase interface and strengthening interface stress transfer. In particular, an optimal ME voltage coefficients (αME) of 144 mV/(cm·Oe) at 1 kHz and 1.05 V/(cm·Oe) at the resonant frequency in the composite was achieved, with a layer thickness ratio (BNKT:0.5BNKT-0.5NZFO:NZFO) of 3:1:6. The static elastic model was used to determine strong interface coupling. A large magnetodielectric (MD) response of 3.95% was found under a magnetic field excitation of 4 kOe. These results demonstrate that transition-layer implantation provides a new path to enhance the ME response in co-fired laminated composite, which can play an important role in developing magnetic field-tuned electronic devices.