In this paper, we introduce an improved algorithm for practical inverse synthetic aperture radar (ISAR) imaging, by {\color{black}utilizing} the advantages of prominent point processing (PPP) and integrated cubic phase function (ICPF) in an efficient way. {\color{black}The} proposed ICPF-PPP algorithm achieves a significant improvement compared to the conventional range-Doppler processing for ISAR imaging of a nonuniformly rotating target in terms of both image quality and computational efficiency. The experimental results using real data sets show that the proposed autofocus chain is highly efficient in forming ISAR images of a nonuniformly rotating target.

In this paper, we propose an entire processing chain that addresses the geometrical defocusing problems caused by a large orbital arc, a high squint, and topography variations in ultra-high-resolution (UHR) synthetic aperture radar (SAR) operations. Slant-range histories are formulated using fifth-order polynomials to accurately express radar signals with a UHR spaceborne and squint SAR geometry. SAR focusing is first conducted with a constant height assumption. Thereafter, residual topography errors are compensated. Several beneficial contributions are included in the proposed processing chain. First, to achieve constant-height SAR focusing, we improve the typical least-square decomposition-based Stolt interpolations in terms of the image quality and computation time. Second, we clarify how illuminated areas are mapped in a two-dimensional imaging domain after polynomial-based focusing, which is completely different from the well-known relationship between the closest range and zero-Doppler time. Third, a generalized block-wise post-focusing method is devised to correct the range and azimuth defocusing effects induced by height variations. These contributions are verified using numerical simulations. Thus, we can conclude that the proposed method can provide focused SAR images for a height-variant geometry in UHR spaceborne and squint operations

To perform three-dimensional (3D) inverse synthetic aperture radar (ISAR) imaging through interferometric processing, all ISAR images should be correctly registered such that the same scatterer appears at the same position along both the range and Doppler directions. However, this condition generally does not hold in most situations because different radar view angles introduce additional angular motion errors that must be compensated. Hence, we herein propose a new ISAR registration method based on joint-channel phase difference (JC-PD) operations. From the result of the JC-PD function, JC-PD profiles are obtained, in which the locations and phases of the maximum peak contain constant and time-varying angular motions, respectively. Using our proposed method, correct ISAR registrations can be achieved in both the range and Doppler directions. In particular, compared to conventional Doppler registration methods, time-varying angular motions are more accurately compensated without the problem of cross-term phase interference. Through simulations and experiments, we verified that the proposed method yielded accurate ISAR registration results; hence, an excellent three-dimensional target reconstruction through interferometric ISAR imaging was demonstrated.

When a target has 3-D rotation accompanying roll–pitch–yaw movement, it yields an additional phase component, which cannot be compensated for by any of the existing inverse synthetic aperture radar (ISAR) imaging methods. Under this condition, the resulting ISAR image will be severely distorted. Accordingly, selecting a proper imaging frame, where the target has only 2-D rotation, becomes the only solution, especially for range-Doppler (RD) algorithm. To do this, the conventional approach is to directly use the phase of the received signal, and however, this approach is vulnerable to noise and the cross-term interference of multiple scattering centers (SCs) in the range bin. To address these issues, we propose a new frame selection method using the range-instantaneous Doppler (RID) technique and Radon transform to detect the presence of 3-D rotation of the target within imaging frame. The proposed method comprises three steps: 1) obtain joint time–frequency distribution (JTFD) via the smoothed pseudo Wigner–Ville distribution (SPWVD); 2) estimate the orientation angle of the Radon image of the JTFD spectrum; and 3) select the suitable imaging frame using the estimated angle. Furthermore, to demonstrate the effectiveness of the proposed method, experimental results based on simulated and real measured data are provided.

한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)