The present investigation deals with the development of a process flow sheet for recovering strategic mineral monazite concentrate from a lean-grade offshore placer deposit of the Bramhagiri coast along the southeast coast of Odisha, India.In the present study, both dry and wet processes are investigated to improve the recovery and purity of monazite. The results of the pre-concentration studies reveal that by using multi-stage spiral concentrators, the Total Heavy Minerals [THM] have been upgraded to 97.8% with a monazite content of 0.33% from a feed sample containing 4.72% total heavy minerals and 0.01% monazite content. The beneficiation studies revealed that the feed was initially subjected to a high-tension separator, and the non-conducting fraction of the high-tension roll was further subjected to magnetic separation. The magnetic product was again subjected to a flotation process followed by cleaning of the flotation product using a magnetic separator. This magnetic product contains 98.89% monazite with 84% recovery and 0.28% yield from a spiral product containing 0.33% monazite and qualifies for extracting rare earths. It is worth recovering monazite mineral from even lean-grade deposits, as it is a source of uranium, thorium, and rare earth elements and is very high in demand for humankind due to technological advancements. In view of this, monazite recovery is not to be considered for the economic profitability of the process but for strategic requirements.
The present study aims to investigate the textural, mineralogical and geochemical characteristics of lean grade placer monazite from the Bramhagiri beach sand deposit to assess the possibility for its use in industrial applications. The bulk back dune sand deposit with 18 samples showed the elements uranium and thorium in traces, phosphorus and calcium in minor amounts, and alumina, silica and titanium in major amounts. Since apatite was absent in this placer deposit, P and Ca were attributed to monazite only. Based on the chemical analysis, it was established that the monazite mineral exists in this deposit. The monazite is generally below the −150- to +90-micron size range, and the concentration of the monazite mineral in the bulk back dune sand is around 0.01% by weight. The structural data and complete chemical analysis established that the monazite is Ce-monazite. The monazites with other heavy mineral sands of the Bramhagiri beach placer deposits were derived from the Eastern Ghats, which closely resembles the mineralogical composition of khondalite, charnockite, leptynite and pegmatite groups of rocks. The Eastern Ghats’ provenance appears to be the primary source for the heavy mineral assemblages of the Bramhagiri placer deposit. Thus, these monazite sands are derived from the granulite facies of metamorphic rocks such as khondalites and charnockites from the Eastern Ghats group of rocks. Garnet is the major mineral, following ilmenite and sillimanite. Zircon, rutile and monazite are minor minerals in the deposit. All these minerals are well liberated and have uniform shapes with variable densities and size ranges, with different magnetic, electrical and surface properties. Hence, the occurrences of these heavy minerals are of economic importance. Further, these minerals can be recovered individually for industrial applications.
This article discusses the process flow chart for the recovery of the rare earthbearing minerals monazite and zircon. The results of this study show that 97.9% monazite with 0.006% yield and 61.2% recovery can be achieved from a feed sample containing 0.0096% monazite by using spiral, electrostatic and magnetic separators followed by flotation. When zircon is subjected to study the process mineralogy, it is observed that a zircon grade in the feed sample containing 0.028% zircon can be upgraded to a zircon grade of 98.7% at the yield of 0.006% and the recovery of 21.5%.
17 March 2024 in Journal of The Institution of Engineers (India): Series D