The paper presents the response of two geodesic domes under seismic excitations. The structures subjected to seismic analysis were created by two different methods of subdividing spherical triangles (the original octahedron face), as proposed by Fuliński. These structures are characterised by the similar number of elements. The structures are made of steel, which is a material that undoubtedly gives lightness to structures and allows large spans. Designing steel domes is currently a challenge for constructors, as well as architects, who take into account their aesthetic considerations. The analysis was carried out using the finite element method of the numerical program. The two designed domes were analysed using four different seismic excitations. The analysis shows what influence particular earthquakes have on the geodesic dome structures by two different methods. The study analysed the maximum displacements, axial forces, velocities, and accelerations of the designed domes. In addition, the Time History method was used for the analysis, which enabled the analysis of the structure in the time domain. The study will be helpful in designing new structures in seismic areas and in assessing the strength of various geodesic dome structures under seismic excitation.
15 September 2020 in International Journal of Space Structures
The paper presents the topological–geometric analysis of a selected number of space frames configurations for geodesic domes which are generated from the regular octahedron. Two subdivision methods for spherical triangles, proposed by Fuliński, were used to create two families of structures. The first family consists of six single-layer and six double-layer geodesic domes shaped on the basis of the first method of subdivision, while the second family contains six single-layer and six double-layer geodesic domes shaped on the basis of the second method of subdivision. The calculated results of the geometric parameters of the analyzed structures were used to create original formulas that allow for more advanced structures to be achieved, that is, with a larger number of nodes and struts. The geometric results were also used to create nomograms showing the range of struts of the same length for double-layer geodesic domes. In both single-layer and double-layer domes, the number of groups of struts of equal lengths and the number of faces with different areas are smaller for structures created according to the first method of subdivision. The comparison of the resulting element quantities of two methods shows that the largest differences appear between the domes with a larger number of struts (up to 67%). Here, the analysis might help the designer reach a final decision on the better choice of topology, in particular, when this aspect is combined with other design goals, such as efficiency, economy, utility, and elegance in the design of the structure and the cover of large areas.
18 September 2023 in Archives of Civil Engineering
This paper presents two methods of shaping the mesh topology of lightweight structures as spherical domes. The two given methods of dividing the initial face of the polyhedra determine the obtained structures, which differ in the way of connecting the nodal points. These points were obtained by applying the algorithm for calculating spherical coordinates presented in the paper, which were then converted to the Cartesian system using transformation formulas. Two models of dome structures are presented, based on a 4608-hedron according to the first division method, and on a 4704-hedron, using the second proposed method with numerical analysis. Thus, the novelty of this paper is an implementation of the formulas and algorithms from geodesic domes based on the regular dodecahedron to the regular octahedron, which has not been presented so far. The choice of the shape of the structure has impacts on sustainable development, dictated by structural and visual considerations, leading to the design of a light structure with low consumption of construction material (steel), which can undoubtedly be helpful when making the final structure shape. In addition, according to this research, it can be concluded that using the first method to create a geodesic dome mesh is more straightforward, safer, and requires less design experience.
Geodesic domes are structures which deliver effective solutions, associated with cost savings, due to the lack of intermediate supports when roofing large-sized objects. The multitude of advantages of this type of construction was translated into the shaping of innovative lightweight objects of geodesic domes, constructed on a regular octahedron. In this article, the use of strut sections was applied to covers generated due to a regular octahedron. Two families of domes were compared, resulting from the use of two methods that differ from each other in their topology. Each family consist of 8 structures thus finally 16 geodesic domes were considered. The generated domes were compared in terms of the same section for all strut elements, and the optimized section for each group of struts. To find the design focused on obtaining optimal solution, a number of comparative analysis were carried out. The presented analysis is extremely important in the context of environmental impact, because it shows the steel consumption and the sense of optimization. It was indicated that by optimizing the cross-sections of the strut elements, the steel consumption, as well as their weight, decreased by approx. 10–25% for dome structures which were created using method 1 and 20–40% for domes generated using method 2. The article aims to provide suggestion on the selection of the appropriate innovative geodesic dome mesh. A mesh based on various methods of shaping the covers of geodesic domes created using a regular octahedron.
This paper presents the problem of the efficient shaping of spherical structures of geodesic domes, which is the basis for creating a regular octahedron, in the aspect of sustainable development. The proposed two methods of shaping covered by this study differ in the way the dividing points of the initial edges of the regular octahedron are connected, and, therefore, in the way the sphere is shaped. Using different methods, two families of domes with different lengths of struts but with a similar number of them were obtained. The conducted comparative analysis leads to the indication of this method of shaping the topology, thanks to which it is possible to obtain structures with less consumption of construction material, and, consequently, with less weight. Both the geometry and weight indicate the advantages of geodesic domes created using the first subdivision method. The selection of the appropriate method of shaping geodesic domes is a consequence of a sustainable design strategy. The presented structures in the form of geodesic domes, the basis of which is a regular octahedron, can be original, innovative coverings, while the detailed analysis carried out is intended to provide design guidelines that will facilitate both architects and designers.