Although fatigue failure is well documented in metallic glasses, the mechanism responsible for damage accumulation during cyclic loading below the yield point remains elusive. This letter describes a high-resolution nanomechanical study of an Fe-based bulk metallic glass subjected to cyclic loading in the nominal elastic range. An increase in the yield load was observed with an increasing number of subyield loading cycles, providing a clean documentation of kinematic irreversibility in very small volumes of material that experience no shear bands either prior to or during cyclic loading.

An instrument capable of performing nanoindentation at temperatures up to 500 °C in inert atmospheres, including partial vacuum and gas near atmospheric pressures, is described. Technical issues associated with the technique (such as drift and noise) and the instrument (such as tip erosion and radiative heating of the transducer) are identified and addressed. Based on these considerations, preferred operation conditions are identified for testing on various materials. As a proof-of-concept demonstration, the hardness and elastic modulus of three materials are measured: fused silica (nonoxidizing), aluminum, and copper (both oxidizing). In all cases, the properties match reasonably well with published data acquired by more conventional test methods.

A combined program of experiments and simulations is used to study the problem of cyclic indentation loading on metallic glasses. The experiments use a spherical nanoindenter tip to study shear band formation in three glasses (two based on Pd and one on Fe), after subjecting the glass to cycles of load in the nominal elastic range. In all three glasses, such elastic cycles lead to significant increases in the load required to subsequently trigger the first shear band. This cyclic hardening occurs progressively over several cycles, but eventually saturates. The effect requires cycles of sufficient amplitude and is not induced by sustained loading alone. The simulations employed a new shear transformation zone (STZ) dynamics code to reveal the local STZ operations that occur beneath an indenter during cycling. These results reveal a plausible mechanism for the observed cyclic hardening: local regions of confined microplasticity can develop progressively over several cycles, without being detectable in the global load–displacement response. It is inferred that significant structural change must attend such microplasticity, leading to hardening of the glass.