Metal additive manufacturing (metal-AM) technology has made significant progress in the field of biomedicine in recent years. Originally, it was only used as an innovative resource for prototypes. With the development of technology, custom orthopedic implants could be produced for different patients. Titanium alloy is non-toxic and harmless in the human body. It has excellent biocompatibility and can promote the growth and regeneration of bones in its interior. Therefore, it is widely used in the medical industry. However, in the process of additive manufacturing and printing titanium alloys, there are often cases where the powder is not completely melted or the powder adheres to the product structure after printing, which introduces new biological risks. This paper summarizes the causes of powder adhesion from the perspective of the process involved in additive manufacturing, expounds the influence of different processes on the powder adhesion of titanium alloy forming parts, introduces the mainstream methods of powder sticking removal and summarizes the application of the additive manufacturing of titanium alloy in the medical field, which provides a theoretical basis for further development of the application of titanium alloy additive manufacturing technology in the medical industry.

A cellular automata model was established to simulate grain coarsening processes pinned by second-phase particles. The influences of particle coarsening, precipitation, growth and dissolution, which contain complex changes of size and number density of the particles, on the grain coarsening kinetics were investigated by considering the following two factors: average pinning force per particle and particle number density. The simulation results showed that the average pinning force per particle was related to the particle size, but little influenced by the particle number density. The investigations about the grain boundary/particles interactions showed that the increase of number fraction of particles, which located at the grain boundary junctions, should be the reason for the increase of average pinning force per particle. Then the limiting grain size was researched and compared to the results of some other models. The results showed that the average number of particles to stagnate a grain was related to both the number density and size of particles. At last, the comparisons between the present simulation results and the other simulation and experimental results showed that the present models were efficient in simulating the grain coarsening processes pinned by second-phase particles.