Wheel-based network resilience passive optical network (PON) based on mode division multiplexing (MDM) can be integrated with optical code division multiple access (OCDMA) schemes efficiently for the fixed and backhaul traffic under normal and break/failure fiber operating conditions. In this work, a bidirectional 10/2.5 Gbit/s hybrid MDM-OCDMA-PON system using multi-weight zero cross-correlation (MWZCC) code is proposed. Donut modes 0 and 1 are incorporated by the MDM technique in the proposed system. The benefit of this work is to offer an inexpensive, high-bandwidth and advanced long-haul network with satisfactory resource utilization ability for fiber links with protection against faults and to improve the reliability along with survivability of the network. The simulation results show the successful realization of the multimode fiber (MMF) link at 1.6 km in the uplink and 1.2 km in the downlink directions under an acceptable bit error rate (BER). The minimum accepted received power of −31 dBm in uplink and −27 dBm in downlink over 1 km link at 10/2.5 Gbit/s rate is obtained. Moreover, the minimum received power of −20 dBm in uplink and −30 dBm downlink is achieved by using MWZCC code compared to other codes handling 58 simultaneous end users. Further, the influence of fiber impairments and connected devices on the proposed approach is numerically evaluated. Moreover, it is shown that the wheel based proposed approach performs well than other topologies for the bidirectional network resilience transmission.

Hybrid free-space optics (FSO) and optical fiber have been viewed as vital transmission techniques to satisfy high bandwidth and extended transmission range requirements under adverse environment conditions in the future last-mile obstruction problem. In this investigation, 80 Gbps data is transmitted on a hybrid FSO and multimode fiber (MMF)-based network using mode division multiplexing of two donut modes, Donut mode 0 and 1, and optical code-division multiplexing (OCDMA) schemes. For the OCDMA schemes, modified new zero-cross-correlation (MNZCC) codes are used, whereas, to add the phases into donut modes, a spiral phase diffuser is used. The purpose of the investigation is to provide an economical, high-speed and advanced last-mile network with adequate resource utilization for hybrid wired/wireless-based systems. The results obtained show achievement of an acceptable BER up to a fixed 100 m FSO link, with the combination of a 385 m MMF link under clear weather conditions. In another case, when the MMF link was fixed at 100 m, an acceptable bit error rate (BER) is achieved at 2.07 km FSO link. Furthermore, the results were obtained in the presence of strong and weak turbulences. A comparison of log-normal and gamma-gamma modeling for scintillations is presented.