Natural-fiber-reinforced polypropylene (PP) composites with a series of advantages including light weight, chemical durability, renewable resources, low in cost, etc., are being widely used in many fields such as the automotive industry, packaging, and construction. However, the flammability of plant fiber and the PP matrix restricts the application range, security, and use of these composites. Therefore, it is of great significance to study the flame retardants of such composites. In this paper, sisal-fiber-reinforced polypropylene (PP/SF) flame-retardant composites were prepared using the two-step melt blending method. The flame retardant used was an intumescent flame retardant (IFR) composed of silane-coated ammonium polyphosphate (Si-APP) and pentaerythritol (PER). The influence of different blending processes on the flammability and mechanical properties of the composites was analyzed. The findings suggested that PP/SF flame-retardant composites prepared via different blending processes showed different flame-retardant properties. The (PP/SF)/IFR composite prepared by PP/SF secondary blending with IFR showed excellent flame-retardant performance, with a limited oxygen index of about 28.3% and passing the UL-94 V-0 rating (3.2 mm) in the vertical combustion test. Compared with the (PP/IFR) /SF composite prepared by a matrix primarily blended with IFR and then secondly blended with SF, the peak heat release rate (pk HRR) and total heat release (THR) of the (PP/SF)/IFR composite decreased by 11.3% and 13.7%, respectively. In contrast, the tensile strength of the (PP/SF)/IFR system was 5.3% lower than that of the (PP/IFR)/SF system; however, the overall mechanical (tensile, flexural, and notched impact) properties of the composites prepared using three different mixing processes were similar.
30 October 2020 in Journal of Applied Polymer Science
Core–shell structured TiO2 is a promising solution to promote the photocatalytic effectiveness in visible light. Compared to metal or semiconductor materials, polymers are rarely used as the core materials for fabricating core–shell TiO2 materials. A novel core–shell structured polymer@TiO2 was developed by using phenolic polymer (PP) colloid nanoparticles as the core material. The PP nanoparticles were synthesized by an enzyme-catalyzed polymerization in water. A subsequent sol–gel and hydrothermal reaction was utilized to cover the TiO2 shell on the surfaces of PP particles. The thickness of the TiO2 shell was controlled by the amount of TiO2 precursor. The covalent connection between PP and TiO2 was established after the hydrothermal reaction. The core–shell structure allowed the absorption spectra of PP@TiO2 to extend to the visible-light region. Under visible-light irradiation, the core–shell nanosphere displayed enhanced photocatalytic efficiency for rhodamine B degradation and good recycle stability. The interfacial C–O–Ti bonds and the π-conjugated structures in the PP@TiO2 nanosphere played a key role in the quick transfer of the excited electrons between PP and TiO2, which greatly improved the photocatalytic efficiency in visible light.