CO₂-N₂-mixture injection can be used for the exploitation and reformation of natural gas hydrate reservoirs. The permeability evolution of sediments in the presence of CO₂-N₂ hydrate is very important. In current permeability tests, hydrate-bearing sediment formed from CO₂-N₂ gas mixture is rarely involved. In this work, hydrate-bearing sediment was formed from CO₂-N₂ mixtures, and a constant flow method was employed to measure the permeability of the hydrate-bearing sediments. The effects of CO₂ mole fraction and hydrate saturation on the permeability were investigated. The results show that gas composition is the key factor affecting hydrate formation. Hydrate saturation increases with increasing CO₂ mole fraction in the gas mixture. The presence of hydrate formed from a CO₂-N₂ mixture leads to a sharp permeability reduction. The higher the fraction of CO₂ in the injected gas mixture, the lower the sediment’s permeability. Our measured permeability data were also compared with and fitted to prediction models. The pore-filling model underestimates the permeability of hydrate-bearing sediments formed from a CO₂-N₂ gas mixture. The fitted hydrate saturation index in the Masuda model is 15.35, slightly higher than the general values, which means that the formed hydrates tend to occupy the pore center, and even block the pore throat.

With the large-scale promotion and application of CO₂ flooding, more and more engineering problems have emerged. Due to the high CO₂ mole fraction, the associated gas of CO₂ flooding very easily forms solid hydrates, compared to conventional natural gas. This has resulted in production decline or shutdown. Understanding the phase equilibrium conditions for hydrate formation in production fluids is crucial for hydrate prevention and control. In this study, accurate predictions of CO₂-CH₄ mixed gas hydrate formation conditions were performed using theoretical models. The temperature and pressure ranges for hydrate formation were calculated for different CO₂ mole fraction, ranging from −11.5 °C to 20.85 °C and from 0.81 MPa to −28.1 MPa, respectively. Based on the calculated phase equilibrium data, a multi-parameter empirical model was developed using polynomial fitting. The calculation errors for the multi-parameter empirical model were 3.09%. The multi-parameter empirical model established in this study can avoid complex thermodynamic equilibrium calculations and has the advantages of simplicity, high accuracy, and wide coverage of downhole conditions. Based on the calculated phase equilibrium data, the dissociation enthalpy of CO₂-CH₄ hydrate below and above the freezing point of water was calculated. The results showed that an increase in CO₂ mole fraction led to an increase in hydrate dissociation enthalpy and enhanced thermodynamic stability, making hydrate prevention more challenging. Our work can contribute to the optimization of CO₂ production fluid treatment processes and the development of hydrate prevention and control technologies.

CO₂ sequestration in sediments as solid hydrate is considered a potential way to capture and store anthropogenic CO₂. When CO₂ hydrate is formed in front of CO₂ migration, the injection channel will be blocked, and the removal of hydrate blockage becomes the first problem that must be faced. This work proposed an N₂ injection method to remove CO₂ hydrate blockage. Based on numerical simulation, a study was conducted using TOUGH+MIXHYD v.1.0 to confirm the feasibility of N₂ injection and compare it to depressurization. The spatial and temporal distribution characteristics of pressure, temperature, hydrate saturation, and gas saturation were investigated. Under the combined effects of temperature, pressure, and gas composition, secondary CO₂-N₂ hydrate can form far from the injection point, causing an increase in local temperature and hydrate saturation. The rate of CO₂ hydrate dissociation using direct depressurization is significantly slower compared to N₂ injection methods. As the pressure of N₂ injection increases, the rate of CO₂ hydrate dissociation notably accelerates, which does not show a significant increase with increasing injection temperature. This work introduced a novel approach to addressing the issue of CO₂ hydrate blockage, which holds prominent significance for the advancement of hydrate-based CO₂ geological sequestration.