As minimum area SRAM bit-cells are obtained when using cell ratio and pull-up ratio of 1, we analyze the possibility of decreasing the cell ratio from the conventional values comprised between 1.5-2.5 to 1. The impact of this option on area, power, performance and stability is analyzed showing that the most affected parameter is read stability, although this impact can be overcome using some of the read assist circuits proposed in the literature. The main benefits are layout regularity enhancement, with its consequent higher tolerance to variability, cell area reduction by 25 percent (with respect to a cell having a cell ratio of 2), leakage current improvement by a 35 percent, as well as energy dissipation reduction and a soft error rate per bit improvement of around 30 percent.
One of the challenges in construction is the improvement of energy efficiency of buildings. Development of construction materials of low thermal conductivity is a straightforward way to improve heat isolating capability of an enclosure. Lime mortar has a number of advantageous and peculiar properties and was widely used until the “irruption” of Portland cement. Currently, lime mortar is still used in restoration of traditional buildings or, according to the urban regulations, in catalogued constructions. The goal of the present study is the improvement of the heat isolating capability of lime mortars. The strategy of this work is the addition of iron (III) oxide powder, which is one of the possible components forming the cements, to a base lime mortar. The reason to choose Fe2O3 was two-fold. The first reason is low thermal conductivity of Fe2O3 compared to lime mortar. The second reason is that the low solubility and small size of iron (III) oxide particles have an effect on the thermal conductivity across the lime particles. The effect of iron (III) oxide powder on the thermal conductivity has been experimentally determined by the hot-box method. It has been found that the insulating capacity and thermal inertia of lime mortar is improved significantly by the addition of Fe2O3 powder, increasing the energy saving of the enclosure.
SRAM cell sensitivity to process variation increases aggressively with technology scaling trends. Long-term aging parameter variability degrades 6T-SRAM cells performance in the nanometre era. More accurate and non-invasive methodologies must be provided to extend the free-failure period for high reliability systems. This paper proposes a Word-Line Voltage Margin estimator to observe SRAM performance degradation. The proposed on-line estimator approach does not require memory array modification and it can be shared with all embedded memories in a SoC reducing its area overhead.
Posidonia oceanica as thermal insulation: Determination of the minimum bulk density, according to project specifications, for its use as a building solution on a flat roof
This paper proposes a transmission power management algorithm based on link quality parameter to obtain savings in node energy consumption. The radio operation is the most power consuming task in a wireless node network; therefore the proposed algorithm tries to determine the optimum transmission power level to use only the required energy. A new decision index is defined based on link quality information to determine the optimum transmission power level. Experimental data of node consumption and link quality is used to evaluate the energy efficiency of the proposed algorithm. In addition, the energy efficiency of the algorithm is also estimated using a proposed mathematical model, independent of the hardware platform used. Furthermore, the proposed power savings algorithm is implemented at application layer without requiring any physical or MAC layers modifications.
A new writability metric is proposed to estimate the write margin using regular read and write access to 6T CMOS SRAM cells. The metric is obtained with a fully digital way and is compared with others methods based on the measure of the bit-line current while word-line or the bit-line voltages are being swept. A good correlation between proposed and previous metrics is demonstrated. The proposed metric estimates the writability margin regular read/write operations. Therefore, the memory cell array is not modified allowing to monitor the SRAM cell writability characterization evolution during memory lifetime.