Zainab Ahmed Alkaissi

Dr. Zainab Ahmed Alkaissi

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2020 in Journal of King Saud University – Engineering Sciences
Verified
Journal Article
Open access
Zainab Ahmed AlkaissiZainab Ahmed Alkaissi
Zainab Ahmed Alkaissi

30 September 2017 in Al-Khwarizmi Engineering Journal
Verified
Journal Article
Open access
PDF file
Zainab Ahmed AlkaissiZainab Ahmed Alkaissi
Zainab Ahmed Alkaissi
Travel Time estimation and reliability measurement is an important issues for improving operation efficiency and safety of traffic roads networks. The aim of this research is the estimation of total travel time and distribution analysis for three selected links in Palestine Arterial Street in Baghdad city. Buffer time index results in worse reliability conditions. Link (2) from Bab Al Mutham intersection to Al-Sakara intersection produced a buffer index of about 36% and 26 % for Link (1) Al-Mawall intersection to Bab Al- Mutham intersection and finally for link (3) which presented a 24% buffer index. These illustrated that the reliability get worst for link (2), (1) and (3) respectively during the peak period. Extra delay is observed on link(1), (2) and (3) in terms of 95% percentile travel time of about (301.9, 219.4, and 193.8)sec. for Link (1, 2 and 3) respectively. Higher value for 95% travel time is obtained for link (1). Travel time index (TTI) of 4.2 %, 4.9% and 4% is obtained for Link (1, 2 and 3) respectively. Maximum value for delay per km that obtained for link (1) which is about 266 sec/km and 268 sec./km for link (3) and 244 sec/km for link(2). Different predicted model for the three studied links of Palestine street have been developed based on the obtained field data. A best fit is presented as compared the predicted models with the observed field travel time data for all the models of studied links which illustrated that the predicted model can present the actual field data. Keywords: Delay, Buffer Index, Travel Time, predicted model, Reliability, Urban Arterial.

1 January 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
Zainab Ahmed AlkaissiZainab Ahmed Alkaissi
Zainab Ahmed Alkaissi
RHR Y Hussain
R Y Hussain
Delays at signalised intersection are considered the most important measure of effectiveness (MOE) for signalised intersections as these are used to determine the level of service (LOS). Thus, the aim of this research is the estimation of total delay and modelling of signalised intersections in Baghdad along the Palestine arterial street. Global Positioning System (GPS) receivers provide an opportunity to accurately measure intersection delay in terms of deceleration delay, stopped delay, and acceleration delay. The field data were collected for the selected sections of Palestine arterial street for Bab Al Moatham; AlSakhara; Beirut; and Maysaloon intersections respectively. Congestion of traffic conditions takes place during peak hours of the day, so from 12:00 to 3:00 p.m. on Mondays and Tuesdays in May 2019 were selected to study the variations of total travel time and travel delay times for each intersection in the selected sites. GPS essential measurement equipment running on cell phones was applied to compute the delay components for each group’s set of data points recorded at peak periods on each selected intersection corridor. A total of 60 test runs were carried out in the north and south direction in each case. The obtained results indicated that the stopping time for vehicles represents the major part of total control delay reaching about 88% of the control delay at some signalised intersections (Beirut and Bab Al Moatham intersections) at peak hours. The acceleration delay time was also higher than the deceleration delay time. GPS was also shown to be an effective field tool to accurately measure intersection delay as composed of deceleration delay, stopped delay, and acceleration delay for oversaturated traffic conditions.

14 April 2022 in Journal of Engineering and Applied Science
Verified
Journal Article
Open access
PDF file
Zainab Ahmed AlkaissiZainab Ahmed Alkaissi
Zainab Ahmed Alkaissi
Today, our community is facing a growing numbers of transportation challenges, as traffic grows and congestion worsens for signalized intersections. Based on that its needed balances solutions that improve safety and keep mobility for users with minimum travel time. The objective of this research is to investigate the implementation of continuous flow intersection with displaced left turn with developed simulation traffic model by VISSIM program to evaluate the traffic operation impacts of displaced left turn on performance of signalized intersection in terms of vehicle delay, length of queue, and stopped delay. This research studied congested signalized intersections in Baghdad City. An innovative solution of continuous flow intersection with displaced left turn was implemented to alleviate congestion and high vehicle delay.The displaced left turn DLT reduced the average vehicle delay about 44% and improved the deterioration level of service from (F) to better level of service (D) for north and south approaches which represented the most congested legs of intersection during the peak period. The results of stopped delay for DLT intersection with developed signal timing were lowest than the conventional intersection by about 51% and 34% for south and north approaches respectively. This implies that DLT intersection reduced the extra stops of vehicle and improved the overall efficiency of signalized intersection. The reduction in the queue length ranged from 47.5 to 42%; otherwise conventional intersection showed long queue length and higher vehicle delay. Therefore, regarding queue length, DLT intersection with developed signal timings strategy had better performance for traffic operation than conventional intersection.

14 January 2023 in Tikrit Journal of Engineering Sciences
Verified
Journal Article
Open access
PDF file
Zainab Ahmed AlkaissiZainab Ahmed Alkaissi
Zainab Ahmed Alkaissi
The severity of traffic congestion has increased in Baghdad city and influenced the public’s perception of the community. Extended travel time is experienced by users of the urban street system, so optimal traffic operation with a coordinated traffic signal system becomes necessary. Also, it is needed to alleviate congestion and progress traffic movement along the urban corridor. This study aims to evaluate and optimize traffic signal timing for selected intersections on Palestine arterial corridor and apply the coordinated signal system to reduce the users’ travel time on the selected urban corridor. Analyzing and evaluating congested signalized intersections using Synchro (ver.9) (Al-Nakhala intersection, Al-Sakhra intersection, and Beirut intersection) were performed. Also, their adopted strategies for improving traffic performance and reducing delays were provided. The overall assessment in terms of the level of service for the current traffic states is (LOS F) with an average control delay of (197.2, 166.8, and 262.3) sec/veh. for the Al-Nakhala, Al-Sakhra, and Beirut intersections respectively. The queue length appears after two cycles, becoming more severe congestion at intersections under oversaturated traffic conditions. The performance operation efficiency improved by reducing the control delay from (197.2 to 88) sec/veh, (166.8 to 46) sec/veh, and (262.3 to 76) sec/veh for the Al-Nakhala, Al-Sakhra, and Beirut intersections respectively. Even at high volume and oversaturated conditions, the blocked intersections were effectively alleviated. Finally, it was observed that the proposed signal coordination, built on standard actuated control significantly performed along the urban corridor, reducing vehicles’ delay. However, there are still concerns regarding the flow-to-capacity ratio (v/c ratio is still greater than 1), and the level of service is still in poor conditions (LOS E) for Beirut and (LOS F) for Al-Nakhala intersections. The application of signal coordination improved traffic progression by reducing travel time, and vehicle delay and alleviating blocked intersections.

1 July 2024 in Civil Engineering Journal
Verified
Journal Article
Open access
PDF file
Zainab Ahmed AlkaissiZainab Ahmed Alkaissi
Zainab Ahmed Alkaissi
The issue of traffic congestion at signalized intersections is a concern in transportation systems due to the growth of urban areas and increased vehicular transportation. To study the evolution of congestion and evaluate the traffic performance operation of signalized intersections under problematic congested and improved conditions, the microscopic simulation VISSIM software is utilized. The objectives of this paper are to evaluate operational techniques, build a simulation model, and produce a well-calibrated and validated model. The methodology procedure to evaluate the signalized intersection involves the application of a traffic simulation model to observe real-time delays and stopped vehicles. Using the VISSIM software Version 9 to create an intersection model and redesign geometry with an exclusive right turn to enhance the intersection functionality and reduce delay. Our research focused on the Al-Nakhala signalized intersection located in the southern part of Palestine urban street in Baghdad city. This intersection is one of the busiest along the corridor due to significant land-use changes in the study area, including residential, educational, or commercial areas generating daily pressure from additional trips and saturating the absorptive capacity of the intersections. The proposed scenario of an exclusive right–turn could reduce the queue length and vehicle delay at the signalized intersection, resulting in a more efficient traffic operation. As a result of the reduction in vehicle delay, the Level of service (LOS) for the north, west, and east approaches improved from F to D. However, there was only a slight improvement for the south approach, with the LOS changing from E to F. Nonetheless, there was a noticeable reduction in queue length and vehicle delay ranging from 25% to 50%. Doi: 10.28991/CEJ-2024-010-07-010 Full Text: PDF