In this paper we propose using modern machine learning techniques including least absolute shrinkage and selection operator (lasso), artificial neural networks (ANN) and k-nearest neighbor methods (kNN), for antenna design optimization. The automated techniques are shown to provide an efficient, flexible, and reliable framework to identify optimal design parameters for a reference dual-band double T-shaped monopole antenna to achieve favorite performance in terms of its two bands i.e. between 2.4-3.0 GHz and 5.15-5.6 GHz, respectively. In this paper, we also present a thorough study and comparative analysis of the results predicted by these machine learning techniques, with results obtained from HFSS to verify the accuracy of these techniques.
20 July 2018 in IEEE Antennas and Wireless Propagation Letters
A three-dimensional (3-D) printed W -band slotted waveguide array antenna (SWAA) is proposed. The proposed SWAA consists of three different sections (two horizontal ones and a vertical one) such as a radiating waveguide array with 10 × 10 slots array with an aperture size of 31 mm × 31.4 mm, a coupling waveguide to feed the radiating waveguide array, and a vertical waveguide to feed the coupling waveguide. Machine learning technique based on artificial neural network algorithm is used to optimize the design. The optimized SWAA is fabricated using stereolithography apparatus (SLA) 3-D printing and then is metallized with silver on the inner and outer surfaces by jet metal spraying method. To metallize the inner and outer surfaces of the monolithic structure, nonradiating slots are added on the surface of the designed SWAA. The surface roughness is taken into account by employing the Huray-model methodology in simulation. The SWAA has a 22.5 dBi far-field gain, a −13.5 dB sidelobe level, and 10° half-power beamwidth (HPBW) at 78.7 GHz in measurement.
An all-dielectric THz waveguide has been designed, fabricated and characterized. The design is based on a hollow-core electromagnetic crystal waveguide, and the fabrication is implemented via polymer-jetting rapid prototyping. Measurements of the waveguide power loss factor show good agreement with simulation. As an initial example, a waveguide with propagation loss of 0.03 dB/mm at 105 GHz is demonstrated.
24 April 2018 in IEEE Transactions on Antennas and Propagation
In this paper, we apply the mantle cloaking method to reduce the mutual coupling between two closely spaced wideband antennas operating at microwave frequencies. We show that by introducing two dielectric elliptical shells around the antennas and covering them with two strongly coupled elliptically shaped metasurfaces comprised of I-shaped printed unit cells, it is possible to significantly increase the original bandwidth of the antennas and, at the same time, reduce the mutual electromagnetic interaction. This effect is observed both in a reduction of mutual S-parameters between the antennas and in the restoration of the original radiation patterns, as if the antennas were almost completely isolated from each other. Broadband metasurface/cloak designs are proposed for two geometries, with the free-standing strip monopole antennas placed over a ground plane and with the metasurface cloaks integrated with microstrip antennas.
Artificial effective media are attractive because of the fantastic applications they may enable, such as super lensing and electromagnetic invisibility. However, the inevitable loss due to their strongly dispersive nature is one of the fundamental challenges preventing such applications from becoming a reality. In this study, we demonstrate an effective gain medium based on negative resistance, to overcompensate the loss of a conventional passive metamaterial, meanwhile keeping its original negative-index property. Energy conservation-based theory, full-wave simulation and experimental measurement show that a fabricated sample consisting of conventional sub-wavelength building blocks with embedded microwave tunnel diodes exhibits a band-limited Lorentzian dispersion simultaneously with a negative refractive index and a net gain. Our work provides experimental evidence to the assertion that a stable net gain in negative-index gain medium is achievable, proposing a potential solution for the critical challenge current metamateiral technology faces in practical applications.
Modern rapid prototyping technologies are now capable of build resolutions that allow direct fabrication of photonic structures in the GHz and THz frequency regimes. To demonstrate this, we have fabricated several structures with 3D electromagnetic bandgaps in the 100-400 GHz range. Characterization of these structures via THz Time-domain Spectroscopy (THz-TDS) shows very good agreement with simulation, confirming the build accuracy of the approach. This rapid and inexpensive 3-D fabrication method may be very useful for a variety of potential THz applications.