In this work, we performed physical analysis of resonant plasma-wave transistors (PWTs) for terahertz (THz) emitters. Through the analytical decomposition of plasma-waves into upstream and downstream focusing on the different phase velocity, we show that the reflection coefficient is over unity and newly introduce the PWT design window based on a simple 2-D plot, which can provide both the maximum channel length (L max ) and operation frequency. By our design window analysis, strained silicon channel with a momentum relaxation time of 50-160 fs (i.e., channel mobility 500-1500 cm 2 /Vs) show technology-compatible Lmax as 12-40 nm with a tunable resonance frequency of 2- 10 THz .
This study examines the effect of gate recess depth on the electrical and RF performance of AlGaN/GaN high electron mobility transistors (HEMTs) before and after die‐attach. Devices with greater recess depths exhibited notably larger improvements in transconductance and RF metrics (f t , f max ) due to mechanical and thermal stresses induced by packaging, which partially mitigated damage caused by recess etching. However, these recessed devices simultaneously showed substantial increases in gate and drain leakage currents due to activation of interface traps, highlighting the complex trade‐off effects introduced by deep recess structures and packaging processes.
The authors propose criteria for recess etching to fabricate T‐gate used in InGaAs high electron mobility transistors (HEMTs). By patterning additional rectangular pads on the source and drain metals in the e‐beam lithography step, it is possible to measure the drain‐to‐source resistance (
R
ds ) and current (
I
ds ). The ratio (Γ) of before and after etching for each
R
ds and
I
ds can be used as criteria to determine the point in time to stop etching. By performing recess etching with Γ= 1.97 for
R
ds and Γ= 0.38 for
I
ds on an epiwafer having cap doping concentration of 2 × 10 19 cm −3 and channel indium content of 0.7, the authors have fabricated InGaAs metamorphic high electron mobility transistor (mHEMT) device showing
g
m,max = 1603 mS/mm and
f
t = 290 GHz at
L
g = 124 nm. The criteria presented can be applied to InGaAs HEMTs with various epitaxial structures.
15 May 2014 in Japanese Journal of Applied Physics
In this paper, we report the possibility of silicon (Si) plasma wave transistor (PWT) as a resonant terahertz (THz) emitter based on the theoretical analysis focusing on the strained Si with enhanced mobility. Under asymmetric boundary conditions for plasma wave instability, the amplitude of plasma wave in FET channel increases and this plasma wave increment provides the basis of the electromagnetic (EM) wave emission from FET. Because this instability is controlled by manipulation of plasma wave velocity (s) and electron drift velocity (v0), we propose the design window based on s-v0 plot which determines whether the device operates as the resonant THz emitters considering all the required physical conditions. It is expected from the proposed design window that strained Si PWT down to 10nm gate length with enhanced channel mobility of 500cm2·V -1·-1 can operate as a resonant emitter in THz frequency range.close1
We report a novel FinFET-based high electron mobility transistor (FinHEMT) with a strained-silicon (s-Si) channel proposed by a simple Si-compatible fabrication process. Through TCAD device simulation, proposed FinHEMT can be used as high-performance low-power transistor with high on-current (> 1 mA/μm) and low off-current (~10 pA/μm). Channel electron mobility in s-Si FinHEMT is highly enhanced over 1000 cmWs, which is 4 times higher than that of FinFET.
In this work, we have shown that plasma-wave transistor (PWT) operates as a terahertz (THz) emitter below maximum gate length (L max ). Because the channel mobility (μ) of strained silicon (sSi) is higher than silicon (Si), we investigate how emission frequency range and L max of sSi PWT THz emitter are improved compared to Si PWT THz emitter by analyzing the effect of momentum relaxation time (τ p ) and electron effective mass (m) on a design window of PWT THz emitter.