Layer-by-layer blade deposition was employed along with a multi-component strategy to construct a quaternary all-polymer system, achieving a high power conversion efficiency of 19.46% and improved outdoor operating stability.
Photodetectors based on organic materials are attractive due to their tunable spectral response and biocompatibility, meaning that they are a promising platform for an artificial human eye. To mimic the photoelectric response of the human eye, narrowband spectrally-selective organic photodetectors are in great demand, and single-component organic photodetectors based on donor-acceptor conjugated molecules are a noteworthy candidate. In this work, we present single-component selective full-color organic photodetectors based on donor-acceptor conjugated molecules synthetized to mimic the spectral response of the cones and rods of a human eye. The photodetectors demonstrated a high responsivity (up to 70 mA/W) with a response time of less than 1 µs, which is three orders of magnitude faster than that of human eye photoreceptors. Our results demonstrate the possibility of the creation of an artificial eye or photoactive eye “prostheses”.
The development of novel non-fullerene small-molecule acceptors (NFAs) with a simple chemical structure for high-performance organic solar cells (OSCs) remains an urgent research challenge to enable their upscaling and commercialization. In this work, we report on the synthesis and comprehensive investigation of two new acceptor molecules (BTPT-OD and BTPT-4F-OD), which have one of the simplest fused structures among the Y series of NFAs, along with the medium energy bandgap (1.85 eV–1.94 eV) and strong absorption in the visible and near-IR spectral range (700–950 nm). The novel NFAs have high thermal stability, good solubility combined with a high degree of crystallinity, and deep-lying levels of the lowest unoccupied molecular orbital (up to −3.94 eV). The BTPT-OD with indan-1-one-3-dicyanvinyl terminal acceptor group is superior to its counterpart BTPT-4F-OD with 5,6-difluorindan-1-one-3-dicyanvinyl group both in the number of synthetic steps and in the photovoltaic performance in OSCs. PM6:BTPT-OD systems exhibit superior photovoltaic performance due to the higher charge mobility and degree of photoresponsiveness, faster carrier extraction, and longer carrier lifetime. As a result, BTPT-OD has almost two times higher photovoltaic performance with PM6 as a donor material due to the higher JSC and FF than BTPT-4F-OD systems. The results obtained indicate that further development of OSCs can be well achieved through a rational molecular design.
Developing organic photothermal agents that are highly stable and have tunable electronic properties is important for advancing low-invasive cancer therapy. In this study, we present the synthesis and evaluation of three conjugated photothermal agents inspired by non-fullerene Y-series acceptors: the small molecule BTPT-OD, as well as two of its polymer derivatives with regular (r-BTPT) and irregular (ir-BTPT) structures. All of the compounds absorb light effectively in the red and near-infrared spectral ranges, with absorption maxima from 734 to 746 nm, and form stable nanoparticles (NPs) via nanoprecipitation, ranging in size from 13 to 39 nm. NPs exhibited negative surface charges, with ζ-potentials of −12.9, −15.5, and −17.9 mV for BTPT-OD, r-BTPT, and ir-BTPT NPs, respectively. Irradiation at a wavelength of 730 nm revealed that r-BTPT and ir-BTPT polymer NPs exhibited a 22- to 40-fold greater phototoxicity against A-549, Sk-Br-3, and MCF-7 human carcinoma cells than the non-polymeric analogue BTPT-OD. The measured photothermal conversion efficiencies ranged from 24 to 27 ± 5%. At the same time, the intracellular ROS generation quantified by the 2′,7′-dichlorodihydrofluorescein diacetate (DCFH-DA) assay was low, allowing us to propose heat-mediated photothermal therapy as a more significant cell death predictor than ROS-mediated photodynamic therapy. This work is one of the first to compare small and polymeric non-fullerene acceptor materials for phototherapy purposes, demonstrating the advantages of using polymers.