The unmanned aerial vehicle (UAV)-borne hyperspectral imaging system has the advantages of high spatial resolution, flexible operation, under-cloud flying, and easy cooperation with ground synchronous tests. Because this platform often flies under clouds, variations in solar illumination lead to irradiance inconsistency between different rows of hyperspectral images (HSIs). This inconsistency causes errors in radiation correction. In addition, due to the accuracy limitations of the GPS/inertial measurement unit (IMU) and irregular changes in flight platform speed and attitude, HSIs have deformation and drift, which is harmful to the geometric correction and stitching accuracy between flight strips. Consequently, radiation and geometric error limit further applications of large-scale hyperspectral data. To address the above problems, we proposed an integrated solution to acquire and correct UAV-borne hyperspectral images that consist of illumination data acquisition, radiance and geometric correction, HSI, multispectral image (MSI) registration, and multi-strip stitching. We presented an improved three-parameter empirical model based on the illumination correction factor, and it showed that the accuracy of radiation correction considering illumination variation improved, especially in some low signal-to-noise ratio (SNR) bands. In addition, the error of large-scale HSI stitching was controlled within one pixel.

The Bidirectional Reflectance Distribution Function (BRDF) is a critical spatial distribution parameter in the quantitative research of remote sensing and has a wide range of applications in radiometric correction, elemental inversion, and surface feature estimation. As a new means of BRDF modeling, UAV push-broom hyperspectral imaging is limited by the push-broom imaging method, and the multi-angle information is often difficult to obtain. In addition, the random variation of solar illumination during UAV low-altitude flight makes the irradiance between different push-broom hyperspectral rows and different airstrips inconsistent, which significantly affects the radiometric consistency of BRDF modeling and results in the difficulty of accurately portraying the three-dimensional spatial reflectance distribution in the UAV model. These problems largely impede the application of outdoor BRDF. Based on this, this paper proposes a fast multi-angle information acquisition scheme with a high-accuracy BRDF modeling method considering illumination variations, which mainly involves a lightweight system for BRDF acquisition and three improved BRDF models considering illumination corrections. We adopt multi-rectangular nested flight paths for multi-gray level targets, use multi-mode equipment to acquire spatial illumination changes and multi-angle reflectivity information in real-time, and introduce the illumination correction factor K through data coupling to improve the kernel, Hapke, and RPV models, and, overall, the accuracy of the improved model is increased by 20.83%, 11.11%, and 31.48%, respectively. The results show that our proposed method can acquire multi-angle information quickly and accurately using push-broom hyperspectral imaging, and the improved model eliminates the negative effect of illumination on BRDF modeling. This work is vital for expanding the multi-angle information acquisition pathway and high-efficiency and high-precision outdoor BRDF modeling.

Hyperspectral images (HSIs) are widely used to identify and characterize objects in scenes of interest, but they are associated with high acquisition costs and low spatial resolutions. With the development of deep learning, HSI reconstruction from low-cost and high-spatial-resolution RGB images has attracted widespread attention. It is an inexpensive way to obtain HSIs via the spectral reconstruction (SR) of RGB data. However, due to a lack of consideration of outdoor solar illumination variation in existing reconstruction methods, the accuracy of outdoor SR remains limited. In this paper, we present an attention neural network based on an adaptive weighted attention network (AWAN), which considers outdoor solar illumination variation by prior illumination information being introduced into the network through a basic 2D block. To verify our network, we conduct experiments on our Variational Illumination Hyperspectral (VIHS) dataset, which is composed of natural HSIs and corresponding RGB and illumination data. The raw HSIs are taken on a portable HS camera, and RGB images are resampled directly from the corresponding HSIs, which are not affected by illumination under CIE-1964 Standard Illuminant. Illumination data are acquired with an outdoor illumination measuring device (IMD). Compared to other methods and the reconstructed results not considering solar illumination variation, our reconstruction results have higher accuracy and perform well in similarity evaluations and classifications using supervised and unsupervised methods.

Although the fusion of multispectral (MS) and hyperspectral (HS) images in remote sensing has become relatively mature, and different types of fusion methods have their own characteristics in terms of fusion effect, data dependency, and computational efficiency, few studies have focused on the impact of radiance extreme areas, which widely exist in real remotely sensed scenes. To this end, this paper proposed a novel method called radiance extreme area compensation fusion (RECF). Based on the architecture of spectral unmixing fusion, our method uses the reconstruction of error map to construct local smoothing constraints during unmixing and utilizes the nearest-neighbor multispectral data to achieve optimal replacement compensation, thereby eliminating the impact of overexposed and underexposed areas in hyperspectral data on the fusion effect. We compared the RECF method with 11 previous published methods on three sets of airborne hyperspectral datasets and HJ2 satellite hyperspectral data and quantitatively evaluated them using 5 metrics, including PSNR and SAM. On the test dataset with extreme radiance interference, the proposed RECF method achieved well in the overall evaluation results; for instance, the PSNR metric reached 47.6076 and SAM reached 0.5964 on the Xiong’an dataset. In addition, the result shows that our method also achieved better visual effects on both simulation and real datasets.

Due to optical noise, electrical noise, and compression error, data hyperspectral remote sensing equipment is inevitably contaminated by various noises, which seriously affect the applications of hyperspectral data. Therefore, it is of great significance to enhance hyperspectral imaging data quality. To guarantee the spectral accuracy during data processing, band-wise algorithms are not suitable for hyperspectral data. This paper proposes a quality enhancement algorithm based on texture search and histogram redistribution combined with denoising and contrast enhancement. Firstly, a texture-based search algorithm is proposed to improve the accuracy of denoising by improving the sparsity of 4D block matching clustering. Then, histogram redistribution and Poisson fusion are used to enhance spatial contrast while preserving spectral information. Synthesized noising data from public hyperspectral datasets are used to quantitatively evaluate the proposed algorithm, and multiple criteria are used to analyze the experimental results. At the same time, classification tasks were used to verify the quality of the enhanced data. The results show that the proposed algorithm is satisfactory for hyperspectral data quality improvement.