Efficient operation technique has always been one of the common goals for researches both in automobile industrial and academic areas. With the great progress of automobile technology, hybrid electric vehicle/plug‐in hybrid electric vehicle (HEV/PHEV) has already become the main achievement of transportation electrification, due to its excellent fuel‐saving performance. Energy management strategy (EMS) is an important link during the HEV/PHEV design procedure, which can govern the energy flow between the fuel tank and the electric energy storage by solving the energy distribution problem. As the continuous development of intelligent connected vehicle technology, designing an efficient EMS with vehicle to infrastructure/vehicle to vehicle (V2I/V2V) information for HEV/PHEV is still a challenge and hot issue. This study presents a deep review of the various EMSs for both conventional HEV/PHEV and that using V2I/V2V information, providing a thorough survey of EMSs using different methodologies. In terms of single‐vehicle and multi‐vehicle scenarios, the EMSs for HEV/PHEV under intelligent transport system is in‐depth reviewed. Finally, the challenges for future research are also identified. This study could provide a comprehensive reference for researchers in field of HEV/PHEV.
23 September 2014 in IEEE Transactions on Vehicular Technology
Typical plug-in hybrid electric buses (PHEBs) with a fast-charged lithium titanate battery, which might fulfill about 70% of the distance of a representative city-bus route, have been adopted in many Chinese cities. Considering that the detailed information of the driving cycle could be deduced with the historical driving data and online estimation methods, there might be an opportunity for applying the dynamic programming (DP)-based global optimal energy management strategy for these PHEBs. However, road slopes or variable loads might induce transient fluctuations of the driving resistance in a given driving cycle. Meanwhile, the single-shaft parallel configuration, with automatic mechanical transmission (AMT), might constrain the implementability of the optimal energy distribution from a DP-based strategy. Therefore, in this paper, a novel correctional DP algorithm is brought forward to balance the optimization of fuel economy and drivability. Simulation results demonstrate that, integrated with the correctional logic of AMT gear shifting, the proposed energy management strategy can guarantee that the engine and the electric machine work in the high-efficiency area with optimal energy distribution, while keeping drivability in the variation of road slope and loads. The proposed method might give a technical solution to these typical PHEBs with a lower cost system configuration of the powertrain in China.
In the future complex intelligent transportation environments, lane-changing behavior of surrounding vehicles is a significant factor affecting the driving safety. It is necessary to predict the lane-changing behaviors accurately. The driving environments and drivers are the main factors of lane-changing. To comprehensively consider their relationship, this article proposes a prediction method based on a fuzzy inference system (FIS) and a long short-term memory (LSTM) neural network. First, to highly integrate driving environments with drivers, drivers’ cognitive processes of driving environments are simulated using FIS. Fuzzy rules are formulated based on drivers’ cognition, and then driving environments information can be transformed into lane-changing feasibility. Second, the obtained lane-changing feasibility and corresponding vehicle trajectory are designed as input variables of LSTM neural network to predict the lane-changing behavior. Third, based on the above prediction results, an intelligent decision-making strategy is designed for path planning of autonomous vehicle to ensure driving safety. The prediction method is trained and tested by the next generation simulation (NGSIM) dataset, which is made up of real vehicle trajectories. The accurate rate of the method is 92.40%. Moreover, the decision strategy is simulated and verified in hardware-in-the-loop system. Results show that the strategy can significantly improve the performance of driving in dealing with lane-changing behaviors.
27 October 2021 in IEEE Transactions on Intelligent Vehicles
With the rapid development of autonomous driving technology, collision avoidance has become a research hotspot since it has the potential to increase safety. To obtain a collision-free path, the artificial potential field (APF) is widely used as a path planning method. APF is capable of establishing functional relationships between the vehicle and surrounding objects. However, the function features of the traditional APF method can cause autonomous vehicles to fall into the local minimum, and the generated zigzag path may be difficult to follow. Motivated by these challenges, this paper proposes a real-time path planning method for autonomous vehicles using the dynamic enhanced firework algorithm-APF. Firstly, to improve the safety and smoothness of the planned path by the traditional APF method, the constraints of the vehicle dynamics and different types of obstacles are taken into consideration. Secondly, an optimization problem is formulated to find an optimal path with the least cost in the driving area. Finally, the proposed method is verified with both a simulation and a hardware-in-loop test environment. The results show that the studied autonomous vehicle successfully avoids obstacles and arrives at the goal position by using the proposed path-planning method, and the path smoothness is improved.
10 April 2024 in Renewable and Sustainable Energy Reviews