Air pollution, resulting from buffing dust waste produced by local leather tanning industry, has become a critical issue for the environment and public health. To promote a circular economy through resource recovery, this work developed a thermal insulation composite using buffing dust-laden tanning waste mixed with polystyrene and a blowing agent. To prepare the samples from leather tanning waste, different proportions of buffing dust (5–20% (w/w)) were blended with polystyrene in the presence of 3% (w/w) blowing agent. The composite material was processed in double-barreled with co-twin extruder to expose it to pressure and then heated at 200 °C. Different physico-chemical properties of composite samples were determined. The prepared composite materials had a good thermal conductivity (0.033–0.029 W/m-K), strong compression (5.21–6.25 ton), density (38–20 kg/m³), and water absorption (5–7.5%), as compared to conventional constructional insulation panels. The thermal conductivity of polystyrene was reduced to 10% after the addition of buffing dust (20% w/w). The presence of a blowing agent in the composite material enhanced its volume without compromising its physico-chemical properties. Thermo-gravimetric analysis showed that the thermal stability of the composite material ranged from 200–412 °C. FTIR analysis indicated that the composite had carbonyl and amino functional groups. The SEM images revealed the formation of voids with a decreasing homogeneity of the composite after the addition of the buffing dust waste. The EDX analysis revealed that the composite also had 62% of C and a tiny amount of Cr. This implies that the composite panels can be used for installation in buildings as thermal insulators in the construction sector. Overall, this work not only resolved the energy consumption problems during manufacturing, but it also brought positive impacts on the environment by recycling hazardous buffing dust and then reusing it as a thermal insulation material. Not only does this reduce the air pollution that results from the buffing dust waste, but this also promotes resource recovery in the framework of a circular economy.

Pakistan is facing severe energy crisis like other developing countries of the world. Among different energy consumers, residential sector consumes about 47 % of total energy. The objective of this research is to find the energy conserving potential of building envelope in residential buildings. So, a prototypical detached family house has been modeled as a case study in Autodesk BIM software, Rivet 2014. In order to quantify the impact of different energy efficient techniques, cooling load analysis has been done for different building envelopes with modifications in walls, roofs and windows. It has been concluded that the building envelope has a significant potential in reducing the energy demand for a residential building. Modifications in building envelope is found to reduce energy consumption by 37 % in contemporary house. Thus, substantial energy savings are possible if designers aggressively promotes the energy efficient measures in building envelope.