The effect of acetate ions on the corrosion of reinforcing steel in chloride environments have been investigated. For this purpose, potentiodynamic polarization curves, electrochemical impedance spectroscopy (EIS) and compressive strength techniques were used. In the presence of acetate ions polarization resistance (Rp) values of reinforced concrete were higher than those without acetate ions. AC impedance spectra revealed the similar results with Rp measurements. The compressive strength of concrete specimens containing acetate ions was measured and an increase of 14.7–38.9% was observed.
In this paper, within the framework of increasing the contributions to sustainable development goals and reducing the water footprint, the sustainable production potential of a factory producing denim fabrics have been studied in association with the sustainable development goals. For this purpose, Life Cycle Assessment and Material Input per Service methods were used to determine the environmental impact factors of the factory and the existing water footprint. Calculations were made in three different ways, taking the factory’s total production capacity, a selected product, and the wet processes into account. Although the sustainable production potential of the factory is demonstrated with the Sustainable Development Goals, it has been determined that the contribution rates differ according to both the calculation method and the production data taken into account. As a result of the evaluations, it has emerged as a more dominant view that the factory’s contribution to the Sustainable Development Goals should be evaluated according to the total production capacity. The sustainability evaluation made according to the total production capacity determined that the factory contributed approximately 12% to Sustainable Development Goal 12 in the period examined, according to both Life Cycle Assessment and Material Input per Service methods. Although there is inconsistency in the Life Cycle Assessment and Material Input per Service method results, it was predicted that there are economic and environmental gain potentials related to Sustainable Development Goals 13, 14, and 15, and the sustainable production potential of the factory can be increased.
8 November 2013 in Protection of Metals and Physical Chemistry of Surfaces
The inhibition effect of methionine on the corrosion behaviour of copper was investigated in 3.5% NaCl solution with and without methionine. For this purpose, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) techniques were used. The surface morphology of the metal surface after exposed to corrosive medium was investigated by scanning electron microscopy (SEM). The effect of temperature has also studied in the temperature range from 298 K to 328 K. The effect of temperature has also studied in the temperature range from 298 K to 328 K. Some thermodynamic parameters were calculated and discussed. It was found that, methionine could inhibit the corrosion of copper in 3.5% NaCl solution. Methionine as a organic corrosion inhibitor for copper, and physically adsorbed molecules forming a protective film. Inhibition efficiency increases with decreasing methionine concentration and behaves as a mixed-type inhibitor.
1 March 2009 in Protection of Metals and Physical Chemistry of Surfaces
The corrosion behaviour of zinc in chloride medium was investigated in the absence as well as the presence, of acetate ions. The temperature effect was also investigated by varying the temperature in a range of 298 to 328 K, while the pH was kept constant at 8.5. Polarization resistance (Rp) and activation energy (Ea) values were determined, by means of potentiodynamic and EIS measurements. Thermodynamic properties were evaluated with the current-potential measurements. The temperature, ionic species and the parts of oxide film on anodic and cathodic processes are discussed. It was shown that zinc acetate [Zn(CH3COO)2] formation could provide important protection with other zinc corrosion products, against the attack of corrosive environment.