In this work, size and shape characteristics of wear debris particles present in the transmission system of heavy earth moving machines have been analysed. Four oil samples were collected from the dumper transmission system for wear debris analysis. Ferrogram maker has been used to seperate the wear particles present in oil samples and to capture the image of particles. The statistical results confirm that the Weibull probability distribution function has more potential to fit the wear particle size distribution accurately than the Rayleigh model in case of heavy earth moving machines. Results show the initiation of abnormal wears and suggested that condition-based maintenance is necessary.
Purpose: The paper aims to monitor the condition of heavy Earth-moving machines (HEMMs) used in open cast mines by lube oil analysis. Design/methodology/approach: Oil samples at periodic interval were collected from the HEMM engine (Model No: BEML BH50M). Ferrography and Field Emission Scanning Electron Microscopy have been used for the wear particle analysis present in oil samples. Viscosity analysis and Fourier transform infrared spectroscopy have been done to investigate the degradation in quality and changes as compared to the initial structural properties of the lubricants. Findings: The results obtained indicates wear in cylinder liner and piston ring. Copper, cast iron, alloy steel and ferrous oxide have been found as rubbing wear particles and cutting wear particles. Contamination level has also been found to be increasing in consecutive older oil samples. Chemical properties degraded with usage time and variations in oxidation and soot level have also been observed in every sample. Practical implications: The results will be very much useful to maintenance teams of mining industry for early prediction of any impending failure of the machines, for example, diesel dilution, severe wear of the piston or cylinder liner leading to seizure can be predicted. Originality/value: The HEMMs are an important piece of equipment in coal mining. Proper condition monitoring of HEMM is required to reduce the break down and down time to increase production.
15 January 2025 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Evaluating lubricant life is crucial for maintaining equipment reliability and preventing failures. Conventional methods often depend on original equipment manufacturer recommendations for lubricant changes, which may result in the premature disposal of operationally effective lubricants, leading to economic costs and degrading overall efficiency. The chemical properties of these samples are evaluated by calculating multiple parameters such as total acid number, total base number, oxidation index, soot level, and water contamination. In addition, rheological properties through viscosity index analysis and the tribological properties via friction-wear analysis are determined. In this study, an artificial neural network (ANN) (a four-layer perceptron) and an adaptive neuro-fuzzy inference system (ANFIS) are applied to predict oil conditions based on multiple calculated parameters. Performance and comparison of these advanced mathematical models are evaluated using statistical indices. Overall, the artificial intelligence (AI)-powered approach proved effective in predicting lubricant life for HEMM. Among the AI models, the ANN model demonstrated particularly strong performance, with a correlation coefficient of 0.99 compared to 0.98 for the ANFIS model. Implementing the ANN model could lead to a potential 19% reduction in current engine oil expenses, which would lower operating costs and decrease environmental impact by reducing the frequency of oil disposal.