Tesfaldet Hadgembes Gebre

Dr. Tesfaldet Hadgembes Gebre

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 January 2025 in Frontiers in Built Environment
Verified
Journal Article
Open access
PDF file
KMKomeil Momeni
Komeil Momeni
Nikolai Ivanovich VatinNikolai Ivanovich Vatin
Nikolai Ivanovich Vatin
MHMohammad Hematibahar
Mohammad Hematibahar
TGTesfaldet Hadgembes Gebre
Tesfaldet Hadgembes Gebre
This review aims to provide a comprehensive analysis of the difference between 3D printed concrete (3DPC) and 3D printing reinforced concrete (3DPRC) technologies, as well as potential future paths for these technologies based on current consolidated approaches. Although 3D printed reinforced concrete technology attempts to strengthen reinforced concrete using 3D printing technologies with polymer ingredients, 3D printed concrete technology concentrates on printing concrete for building concrete structures. In recent years, both technologies have advanced rapidly and become a global research innovation hotspot due to their advantages over traditional construction technology, such as high building efficiency, low labor costs, and less construction waste. Unfortunately, there are several issues with 3DPC and 3DPRC technologies, including competing rheological requirements, integrating hurdles, inadequate interlayer bonding, and anisotropic properties of the material that result in lacking structural performance. The findings of the investigation discuss research gaps and theoretical possibilities for future development in both 3D printing technologies, which can advance concrete technology and safeguard structures under various loads. In the present study, two distinct 3D printing technologies are analyzed, along with their respective uses in material and structural engineering. Additionally, the advantages, methods, and materials utilized for the two types of 3D printing technology are described, and the difficulties and solutions associated with using 3D printed concrete in real-world projects are demonstrated. None of the earlier investigations examined the differences between these two technologies. Although 3DPRC technologies aim to strengthen concrete by incorporating various forms of 3D printed technology, 3DPC technology has been studied for its mechanical qualities and concrete rheology. Meanwhile, engineers in 3D printed concrete technologies try to improve large-scale 3D printers and the mechanical properties of printed concrete, while 3D printing reinforced concrete engineers try to design new patterns of 3D reinforcing patterns due to the improved mechanical properties of concrete. The present study examines the differences between 3DPC and 3DPRC technologies.

8 August 2025 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
MHMohammad Hematibahar
Mohammad Hematibahar
Nikolai Ivanovich VatinNikolai Ivanovich Vatin
Nikolai Ivanovich Vatin
Jana PetruJana Petru
Jana Petru
MBMuhammad Nasir Bashir
Muhammad Nasir Bashir
AHAli Hasanzadeh
Ali Hasanzadeh
ABAmir Bakhtiyari
Amir Bakhtiyari

24 October 2021 in Structural Mechanics of Engineering Constructions and Buildings
Verified
Journal Article
Open access
PDF file
DSDmitry Sharapov
Dmitry Sharapov
TGTesfaldet Hadgembes Gebre
Tesfaldet Hadgembes Gebre
YAYusuf M. Ali
Yusuf M. Ali
This paper content is structure subjected sudden story drift as a result from earthquakes, forming hinges and eventually collapsing. The aim of this paper is to develop building thirty story building for seismic in Khartoum using finite element method (FEM) and the equivalent lateral force (ELF) procedure of American code ASCE 7-16. In current work the thirty-story reinforced concrete building was considered is to analyze the seismic behavior of the reinforced concrete structure to find the drift between the story by finding the maximum displacement from the program that causes the building to collapse, by choosing the shear wall as the support system to resist the lateral load and by looking to model the building inclined to the horizontal plane. Calculations were also made on the drift between the story to compare with the allowable drift. It is implemented in the Robot structural program - an ingenious program for designing and analyzing lateral (seismic) loads.

1 November 2020 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
TGTesfaldet Hadgembes Gebre
Tesfaldet Hadgembes Gebre
VGV V Galishnikova
V V Galishnikova
In this paper the influence of section properties on thin walled beam sections with restrained torsion is studied by considering the angle of twisting for non-uniform torsion. The study is based on the governing equation for non-uniform torsion of thin-walled beam of open and closed cross-sections, including the restrained behavior. The hyperbolic shape functions is used to generate the general solution for homogenous equation as it gives the exact results in accordance with the analytical solution. This study is focused on a bar subjected to torsion with warping of wide-ranging open and closed cross-sections with different value of characteristics number for torsion. The impact of the characteristics number for torsion on different section type is studied and evaluated. The obtained results are compared based on the influence of section properties on the components of the total applied torsion and presented graphical for different value of characteristics number for torsion.

15 December 2020 in Structural Mechanics of Engineering Constructions and Buildings
Verified
Journal Article
Open access
PDF file
NVNikolay I. Vatin
Nikolay I. Vatin
TGTesfaldet Hadgembes Gebre
Tesfaldet Hadgembes Gebre
SGShishay Berhane Gebreslassie
Shishay Berhane Gebreslassie
ВИВатин Николай Иванович
Ватин Николай Иванович
ГХГебре Тесфалдет Хадгембес
Гебре Тесфалдет Хадгембес
ГБГебреслассие Шишай Берхане
Гебреслассие Шишай Берхане
The aim of the work is to present the trend of the advancement of steel design code and practical approach of steel frame design from the current AISC-LFDR to the advanced analysis. As the trend of steel frame analysis method is from first-order elastic analysis to second-order inelastic analysis which is an advanced analysis. Methods. In this paper the comparison between the load - displacement curves of several structural analysis methods is presented. Case studies are considered to analyze by different methods and comparison of practical advanced analysis method with PROKON software. The case studies includes a two-story one bay steel frame and four bays of twelve-stories steel frame. The results of first-order elastic, elastic buckling, second-order and nonlinear analyses of an unbraced frame are compared and their difference is presents. The proposed software for advanced methods demonstrates the accuracy and the computational efficiency in predicting the nonlinear analysis response of steel frame structures.

1 January 2018 in Structural Mechanics of Engineering Constructions and Buildings
Verified
Journal Article
Open access
PDF file
VGVera V Galishnikova
Vera V Galishnikova
TGTesfaldet Hadgembes Gebre
Tesfaldet Hadgembes Gebre
SASahar Mohammed Al-Sabri
Sahar Mohammed Al-Sabri
OSOsman Saffia-Doe
Osman Saffia-Doe
Stability analysis in civil engineering is traditionally centred on the stability of individual components of a structure, rather than on the stability of the assemblage of structural components. This may be explained by the lack of adequate tools for the stability analysis of complete structures in the past. Recently, the necessity of the development of general rational methods of stability analysis with a model of the complex structure is widely recognized. These methods should reliably predict the overall stability of the structure, the interaction between the components of the structure in providing restraint against instability of individual members, and the local stability of each individual member. Development of such theories and corresponding algorithms require a thorough investigation. The aim of this paper is to investigate the instability of single columns without large deflections by means of the second order structural theory and to study the influence of imperfections on the behaviour of such structural elements.