This study aims to investigate the effect of ultrasonic pretreatment on drying time and quality properties of tomato slices dried by microwave combined with hot air at 60°C. The influence of ultrasound pretreatment (0, 20, and 40 min) and microwave power (120, 150, and 180 W) on drying time, color, total phenolic content, lycopene, vitamin C, and rehydration capacity of dried slices of tomato was studied. Results showed that as the microwave power level increased, drying time decreased significantly (about 46.4%). Ultrasound pretreatment decreased the drying time by 7.38% only at 120 W microwave power and 40 min of pretreatment compared to those without ultrasound pretreatment at the same microwave power. Depending on drying conditions, vitamin C and lycopene contents reduced from 433.94 to 81.89 mg AA/100 g dry solids and 3920.57 to 415.40 mg/100 g dry solids, respectively. The change in total phenolic content was not severe as much as vitamin C contents. Rehydration capacity of pretreated samples was larger than nontreated samples. The color values of dried tomato slices were in the acceptable range. Both microwave power and ultrasound pretreatment affected the quality of the final product significantly.

In this study, production of pomegranate juice powder using a spray dryer was investigated. To prevent stickiness, maltodextrin dextrose equivalent 6 (DE6) was used as a drying agent. While feed flow rate, feed temperature, and air flow rate were kept constant, air inlet temperature (110–140°C), percentage maltodextrin (MD; maltodextrin dry solids/100 g feed mixture dry solids; 39.08–64.12%), and feed mixture concentration (19.61–44.11 °Brix) were chosen as the independent variables. Product properties investigated included moisture content, hygroscopicity, anthocyanin content, color change, solubility, bulk density, total phenolics content, antioxidant capacity, and sensory properties. The products were produced with high yield (86%) and high antioxidant activity (77%). MD and drying temperature were found to be the most important variables in production of pomegranate juice powders. Because total color change (ΔE), bulk density, antioxidant capacity, and powder yield were affected strongly by the independent variables, these parameters were used in optimization of the process. The optimum temperature, feed mixture concentration, and percentage maltodextrin were 100°C, 30.8 °Brix, and 53.5% MD, respectively. This study revealed that by applying these optimal conditions, pomegranate juice powder with a 55% dry solids yield, 9.78 total color change, 0.35 g/mL bulk density, and 57.8% antioxidant capacity were produced.