Aleksandra Jeżo

Mrs. Aleksandra Jeżo

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 January 2023 in Forests
Verified
Journal Article
Open access
PDF file
AJAleksandra Jeżo
Aleksandra Jeżo
AWAnita Wronka
Anita Wronka
ADAleksander Dębiński
Aleksander Dębiński
LKLubos Kristak
Lubos Kristak
RRRoman Reh
Roman Reh
Grzegorz KowalukGrzegorz Kowaluk
Grzegorz Kowaluk
The valorization of tree bark through chemical treatment into valuable products, such as bark acid, leads to the formation of process residues with a high solids content. Since they are of natural origin and are able to be suspended in water and acid, research was carried out on the recycling of suberic acid residues (SAR) as a bi-functional component of binder mixtures in the production of plywood. The 5%–20% (5%–30% for curing time) mass content of SAR has been investigated with urea-formaldehyde (UF) resin of about 66% of dry content. The results show that the curing time of the bonding mixture can be reduced to about 38% and 10%, respectively, for hot and cold curing, of the initial curing time for the lowest SAR content. The decreasing curing time of the tested binder mixtures with the increase in SAR content was caused by the increasing amount of acidic filler, since amine resins as UF require acidification hardening, and the curing dynamics are strongly dependent, among others, on the content of the acid medium (curing agent). In the case of hot curing, a SAR content of about 20% allowed us to achieve the curing time of bonding mass with an industrial hardener. Investigations into the mechanical properties of examined panels showed a significant modulus of elasticity (MOE) increase with filler content increase. Similar conclusions can be drawn when analyzing the results of the modulus of rupture (MOR) investigations; however, these were only significant regarding hot-pressed samples. The shear strength of the plywood samples increased with the SAR rise for both cold- and hot-pressed panels. The in-wood damage of samples with SAR filler, hot-pressed, rose up to about 30% for the highest SAR filler content. For cold-pressed samples, no in-wood damage was found. The positive effect of veneer impregnation limiter by resin was identified for SAR acting as a filler. Moreover, a higher density of SAR-containing bonding lines was reached for hot-pressed panels. Therefore, the results confirmed the ability to use the SAR as an upcycled component of the bonding mixture for plywood production.

1 January 2024 in Journal of Renewable Materials
Verified
Journal Article
Open access
PDF file
AJAleksandra Jeżo
Aleksandra Jeżo
Bark extracts are sustainable sources of biopolymers and hold great promise for replacing fossil fuel-based polymers, for example, in wood-based composites. In addition to primary and secondary metabolites, tree bark also contains suberin, which plays a major role in protecting the tree from environmental conditions. Suberin is a natural aliphatic-aromatic cross-linked polyester present in the cell walls of both normal and damaged external tissues, the main component of which are long-chain aliphatic acids. Its main role as a plant ingredient is to protect against microbiological factors and water loss. One of the most important suberin monomers are suberin fatty acids, known for their hydrophobic and barrier properties. Therefore, due to the diverse chemical composition of suberin, it is an attractive alternative to hydrocarbon-based materials. Although its potential is recognized, it is not widely used in biocomposites technology, including wood-based composites and the polymer industry. The article will discuss the current knowledge about the potential of suberin and its components in biocomposites technology, which will include surface finishes, composite adhesives and polymer blends.

5 September 2024 in European Journal of Wood and Wood Products
Verified
Journal Article
Open access
PDF file
GMGabriela Maksymiuk
Gabriela Maksymiuk
AJAleksandra Jeżo
Aleksandra Jeżo
Janis RizikovsJanis Rizikovs
Janis Rizikovs
As awareness grows regarding the necessity for sustainable technologies across various industries, including wood-based composites, there’s a heightened demand for ecological solutions. One of the proposed solutions is the partial replacement of wood raw materials in composites with forestry and agricultural waste, thus contributing to the circular economy. Suberin, which is a natural polyester present in tree bark, after depolymerization can be converted into suberinic acids, and after this process, post-extraction solid residues (SAR suberinic acid residues) remain, which include suberin monomers, lignin, cellulose and esters. In this study, it was decided to use this waste in the form of a powder with dimensions of 0.250 mesh as a filler for particleboards. Three-layer boards were prepared in four variants of SAR share in all layers (0%, 5%, 10%, 15%). The physical and mechanical properties of the manufactured boards were tested—modulus of rupture, modulus of elasticity, internal bond strength, screw withdrawal resistance, thickness swelling, water absorption, density profile, contact angle. The formaldehyde and total volatile compounds emissions of the boards were also determined. As a result of the research, it was shown that the addition of SAR has a positive effect on the properties of the panels, but only up to the level of 10%, whereas for boards with a SAR content of 15%, a statistically significant decrease in mechanical and physical properties was noted. The values ​obtained, however, were still within the required assumptions of the European Standards. Only the IB value obtained for the SAR 15% variant did not meet the requirements of the EU Standards. As shown, SAR addition significantly minimizes the emissions from boards, however, it decreases also the hydrophobicity. This study shows a great potential in applying post-extraction residues from bark as a filler material for wood-based panels.

5 August 2024 in Materials
Verified
Journal Article
Open access
PDF file
AJAleksandra Jeżo
Aleksandra Jeżo
FPFaksawat Poohphajai
Faksawat Poohphajai
Rene Herrera DiazRene Herrera Diaz
Rene Herrera Diaz
Grzegorz KowalukGrzegorz Kowaluk
Grzegorz Kowaluk
Finishing coatings in the wood-based composites industry not only influence the final appearance of the product but also serve to protect against fungi and molds and reduce the release of harmful substances, particularly formaldehyde and volatile organic compounds (VOCs). Carbon-rich materials, such as those derived from birch bark extraction, specifically suberin acids, can fulfill this role. Previous research has demonstrated that adding suberin acid residues (SAR) at 20% and 50% by weight significantly enhances the gas barrier properties of surface-finishing materials based on poly(lactide) (PLA) and polycaprolactone (PCL), particularly in terms of total VOC (TVOC) and formaldehyde emissions. This study aims to explore whether these properties can be further improved through the incorporation of nano-zinc oxide (nano-ZnO). Previous research has shown that these nanoparticles possess strong resistance to biological factors and can positively affect the characteristics of nanofilms applied as surface protection. The study employed PLA and PCL finishing layers blended with SAR powder at 10% w/w and included 2% and 4% nano-zinc oxide nanoparticles. The resulting blends were milled to create a powder, which was subsequently pressed into 1 mm-thick films. These films were then applied to raw particleboard surfaces. TVOC and formaldehyde emission tests were conducted. Additionally, the fungal resistance of the coated surfaces was assessed. The results showed that PLA/SAR and PCL/SAR composites with the addition of nano-zinc oxide nanoparticles exhibited significantly improved barrier properties, offering a promising avenue for developing biodegradable, formaldehyde-free coatings with enhanced features in the furniture industry. Furthermore, by utilizing SAR as a post-extraction residue, this project aligns perfectly with the concept of upcycling.

25 August 2023 in C
Verified
Journal Article
Open access
PDF file
AJAleksandra Jeżo
Aleksandra Jeżo
Grzegorz KowalukGrzegorz Kowaluk
Grzegorz Kowaluk
Finishing coatings used in the wood-based composite industry play a key role in the final appearance of the finished product. However, the use of such coatings is not only for aesthetic purposes, but also to protect the product against surface damage and moisture or to minimize the emission of harmful substances. The latter is an extremely important factor in terms of safety for both the manufacturer and the user, which is why the emissivity test is one of the most important tests conducted in this case. Carbon-rich materials, such as those remaining from the extraction of birch bark, can fulfill the role of minimizing the emission of harmful substances. In this article, an attempt to create coatings in the form of a film by combining a biopolymer with suberinic acid residues (SARs) was made. Two types of biopolymers were used, polylactide (PLA) and polycaprolactone (PCL), in various polymer–SAR ratios. Suberinic acid as a residue is a raw material that can potentially contribute positively to the fixing of CO2 from the atmosphere, which creates the possibility for further use. As part of this study, the obtained coatings were tested in terms of scratch resistance, relative hardness, cold liquids, total volatile organic compounds (TVOCs), formaldehyde emission, surface absorption, etc. Differences between the polymers used and the effect of the SAR additive on selected surface properties were demonstrated. The addition of carbon-rich SAR significantly improves gas barrier properties of the PLA- and PCL-based surface finishing materials. The relative hardness and scratch resistance also increased with rising SAR content. However, the increasing content of SAR filler acts as a limiter in the depth of penetration of the deposited surface finishing materials onto the wood surface. It is possible to state that this innovative approach regarding (1) the utilization of biopolymers as a matrix, instead of conventional, crude oil-based resins, and (2) the incorporation of post-processed carbon-rich waste lignocellulosic materials to produce the surface finishing and/or protective films has been confirmed.

12 August 2024 in Materials
Verified
Journal Article
Open access
PDF file
JDJulia Dasiewicz
Julia Dasiewicz
AWAnita Wronka
Anita Wronka
AJAleksandra Jeżo
Aleksandra Jeżo
Grzegorz KowalukGrzegorz Kowaluk
Grzegorz Kowaluk
No matter where we reside, the issue of greenhouse gas emissions impacts us all. Their influence has a disastrous effect on the earth’s climate, producing global warming and many other irreversible environmental impacts, even though it is occasionally invisible to the independent eye. Phase change materials (PCMs) can store and release heat when it is abundant during the day (e.g., from solar radiation), for use at night, or on chilly days when buildings need to be heated. As a consequence, buildings use less energy to heat and cool, which lowers greenhouse gas emissions. Consequently, research on thermally active medium-density fiberboard (MDF) with PCMs is presented in this work. MDF is useful for interior design and furniture manufacturing. The boards were created using pine (Pinus sylvestris L.) and spruce (Picea abies L.) fibers, urea–formaldehyde resin, and PCM powder, with a phase transition temperature of 22 °C, a density of 785 kg m−3, a latent heat capacity of 160 kJ kg−1, a volumetric heat capacity of 126 MJ m−3, a specific heat capacity of 2.2 kJ kgK−1, a thermal conductivity of 0.18 W mK−1, and a maximum operating temperature of 200 °C. Before resination, the wood fibers were divided into two outer layers (16%) and an interior layer (68% by weight). Throughout the resination process, the PCM particles were solely integrated into the inner layer fibers. The mats were created by hand. A hydraulic press (AKE, Mariannelund, Sweden) was used to press the boards, and its operating parameters were 180 °C, 20 s/mm of nominal thickness, and 2.5 MPa for the maximum unit pressing pressure. Five variants of MDF with a PCM additive were developed: 0%, 5%, 10%, 30%, and 50%. According to the study, scores at the MOR, MOE, IB, and screw withdrawal resistance (SWR) tests decreased when PCM content was added, for example, MOE from 3176 to 1057 N mm−2, MOR from 41.2 to 11.5 N mm−2, and IB from 0.78 to 0.27 N mm−2. However, the results of the thickness swelling and water absorption tests indicate that the PCM particles do not exhibit a substantial capacity to absorb water, retaining the dimensional stability of the MDF boards. The thickness swelling positively decreased with the PCM content increase from 15.1 to 7.38% after 24 h of soaking. The panel’s thermal characteristics improved with the increasing PCM concentration, according to the data. The density profiles of all the variations under consideration had a somewhat U-shaped appearance; however, the version with a 50% PCM content had a flatter form and no obvious layer compaction on the panel surface. Therefore, certain mechanical and physical characteristics of the manufactured panels can be enhanced by a well-chosen PCM addition.