The rapidly growing global demand for pollutant-free cooking energy has proliferated the research and development of energy efficient and clean cook-stoves. This paper presents a comprehensive review on the gradual improvements in cook-stove designs, focusing on gaseous and liquid fuel-operated cook-stoves around the world. Various literatures concerning the technical aspects such as design and testing, are brought together to provide an insight into the present status of developments in cook-stoves. This review of cook-stove performance covers topics such as stable operating conditions, flame propagation aspects, heat transfer and temperature distribution within the burner, fuel consumption, thermal efficiency, and emissions. Covering both laboratory-scale and field studies, the various cook-stove technologies reported so far are summarized with relevant comments regarding their commercial viabilities. The numerical modeling of combustion in cook-stoves; human health and the environmental impacts of unclean cooking technologies; and various schemes, strategies, and governmental initiatives for the promotion of cleaner cooking practices are also presented, with suggestions for future work.
The thermohydraulic behavior of Solar Air Heater (SAH) having spiral-shaped baffles has been experimentally investigated in the present study. The experimental work was performed in India (Mehsana latitude and longitude: 23.5880° N, 72.3693° E) between 8th October 2022 and 15th January 2023. The rotating baffles are employed to achieve the favorable turbulent heat transfer mechanism within the system. The geometrical variables of relative roughness height (e/H) and relative roughness pitch (P/e) were evaluated between the range of 0.4–1.0 and 4–10, respectively, for the Reynolds numbers ( ) values of 4000 to 12000. Temperature difference (T o -T i ), pressure drop (∆P d ), thermohydraulic performance parameter (THPP) and useful heat gain (Q u ) were investigated for the range of e/H and P/e. The e/H turned out to be favorable by its gradual increment from 0.4 to 0.8, thereafter depicting the converse effect. e/H-1 and -12,000 resulted in the highest pressure drop of 150 Pa. The positive impact was noted f o r T o -T i for the increasing range of P/e. P/e-4 and of 12000 demonstrated the maximum pressure drop of 145 Pa. The e/H-0.8, P/e-8, and -12000 has achieved the highest value of useful heat gain, 398.52 W. The increment of 6.84 times and 21.81 times was achieved for both the Nusselt number ( ) and friction factor ( ), respectively, compared to the smooth design of SAH. The value of THPP recorded as 2.68, which is higher than the reported value of 2.26 in the existing literature. In conclusion, the introduction of rotating spiral-shaped baffles presents a promising enhancement for SAH performance. However, further comprehensive field studies are necessary to fully exploit its potential.