The brittleness of rock is known to be an important property that affects the fragmentation characteristics of rock in mechanized rock cutting. As the interaction between the cutting tool and the rock (i.e., cutter forces, cutting efficiency, s/p ratio, and abrasivity) during mechanical rock cutting is strongly influenced by the characteristics of rock fragmentation, the cutting tools (i.e., disc cutter and pick cutter) experience different cutting behaviors depending on the rock brittleness. In this study, the relationships between the rock brittleness and the abrasivity of rock, and the cutting efficiency of a Tunnel Boring Machine (TBM) disc cutter were investigated for Korean rock types. The brittleness was calculated by the mathematical relations between the uniaxial compressive and Brazilian tensile strengths of the rock. The cutting efficiency and abrasivity were evaluated by the cutter forces and specific energy from the linear cutting machine (LCM) test and the Cerchar abrasivity index (CAI) test, respectively. The results show that rock brittleness is significantly correlated with cutting efficiency and CAI values. Consequently, some prediction models for cutter forces, specific energy, and the CAI were proposed as functions of the rock brittleness.
In this study, a new digital technique for the analysis of the mechanical aperture and contact area of rock fractures under various normal stresses is proposed. The technique requires point cloud data of the upper and lower fracture surfaces, pressure film image data of the fracture, and normal deformation data of the fracture as input data. Three steps of algorithms were constructed using these input data: (1) a primary matching algorithm that considers the shape of the fracture surfaces; (2) a secondary matching algorithm that uses pressure film images; and (3) a translation algorithm that considers the normal deformation of a fracture. The applicability of the proposed technique was investigated using natural fracture specimens sampled at an underground research facility in Korea. In this process, the technique was validated through a comparison with the empirical equation suggested in a previous study. The proposed technique has the advantage of being able to analyze changes in the mechanical aperture and contact area under various normal stresses without multiple experiments. In addition, the change in the contact area on the fracture surface according to the normal stress can be analyzed in detail.
30 December 2022 in Journal of Nuclear Fuel Cycle and Waste Technology