Supersonic combustion is an advanced technology for the next generation of aerospace vehicles. In the last two decades, numerical simulation has been widely used for the investigation on supersonic combustion. In this paper, the modeling and simulation of supersonic combustion on general platforms are thoroughly reviewed, with emphasis placed on turbulence modeling and turbulence–chemistry interactions treatment which are both essential for engineering computation of supersonic combustion. It is found that the Reynolds-averaged Navier–Stokes methods on the general platforms have provided useful experience for the numerical simulation in engineering design of supersonic combustion, while the large eddy simulation methods need to be widely utilized and further developed on these platforms. Meanwhile, the species transport models as a kind of reasonable combustion model accounting for the turbulence–chemistry interactions in supersonic combustion have achieved good results. With the development of new combustion models, especially those designed in recent years for high-speed combustion, the turbulence–chemistry interactions treatment for numerical simulation of supersonic combustion based on general platforms is expected to be further mature in the future.
In order to explore plasma-assisted turbulent mixing in aerospace engines, the dielectric barrier discharge plasma actuation for the turbulent mixing of fuel droplets and oxidant air in a ramjet combustor was studied using computational fluid dynamics. A two-way coupling of turbulent air and discrete droplets was realized by Eulerian–Lagrangian simulation, and the dielectric barrier discharge plasma action on flow was modeled by body force. The results show that the plasma actuation can rearrange the recirculation zone behind the evaporative V-groove flameholder, and the main mechanism of actuation is to increase the local momentum of the fluid; the actuation dimension, actuation intensity, and actuation position of the dielectric barrier discharge plasma have strong effects on the turbulent mixing of fuel droplets and oxidant air; and a relatively optimal turbulent mixing can be achieved by adjusting the actuation parameters.