The conversion of CO2 emissions into valuable 3D printed carbon-based materials offers a transformative strategy for climate mitigation and resource utilization. Here, we 3D print carbon nanocomposites from CO2 using an integrated system that electrochemically converts CO2 into CO, followed by a thermocatalytic process that synthesizes carbon nanotubes (CNTs) which are then 3D printed into high-density carbon nanocomposites. A 200 cm2 electrolyzer stack is integrated with a thermochemical reactor for more than 45 h of operation, cumulatively synthesizing 37 grams of CNTs from CO2. A techno-economic analysis indicates a 90% cost reduction in CNT production on an industrial scale compared to current benchmarks, underscoring the commercial viability of the system. A 3D printing process is developed that achieves a high nanocomposite CNT concentration (38 wt%) while enhancing composite structural attributes via CNT alignment. With the rapidly rising demand for carbon nanocomposites, this CO2-to-nanocomposite process can make a substantial impact on global carbon emission reduction efforts.
The goal of this stydy was to explore the potential of the enhanced corrosion resistance of Ti(N,O) cathodic arc evaporation-coated 304L stainless steel using oxide nano-layers deposited by atomic layer deposition (ALD). In this study, we deposited Al2O3, ZrO2, and HfO2 nanolayers of two different thicknesses by ALD onto Ti(N,O)-coated 304L stainless steel surfaces. XRD, EDS, SEM, surface profilometry, and voltammetry investigations of the anticorrosion properties of the coated samples are reported. The amorphous oxide nanolayers homogeneously deposited on the sample surfaces exhibited lower roughness after corrosion attack compared to the Ti(N,O)-coated stainless steel. The best corrosion resistance was obtained for the thickest oxide layers. All samples coated with thicker oxide nanolayers augmented the corrosion resistance of the Ti(N,O)-coated stainless steel in a saline, acidic, and oxidising environment (0.9% NaCl + 6% H2O2, pH = 4), which is of interest for building corrosion-resistant housings for advanced oxidation systems such as cavitation and plasma-related electrochemical dielectric barrier discharge for breaking down persistent organic pollutants in water.
The direct synthesis of dimethyl carbonate (DMC) from methanol and CO2 presents an attractive route to turn abundant CO2 into value-added chemicals. However, insufficient DMC yields arise due to the inert nature of CO2 and the limitations of reaction equilibrium. Oxygen vacancies are known to facilitate CO2 activation and improve catalytic performance. In this work, we have demonstrated that tuning oxygen vacancies in catalysts and implementing in situ water removal can enable highly efficient DMC production from CO2. CexZryO2 nanorods with abundant oxygen vacancies were synthesized via a hydrothermal method. In liquid-phase DMC synthesis, the Ce10Zr1O2 nanorods exhibited a 1.7- and 1.4-times higher DMC yield compared to CeO2 nanoparticles and undoped CeO2 nanorods, respectively. Zr doping yielded a CeZr solid solution with increased oxygen vacancies, promoting CO2 adsorption and activation. In addition, adding 2-cyanopyridine as an organic dehydrating agent achieved an outstanding 87% methanol conversion and >99% DMC selectivity by shifting the reaction equilibrium to the desired product. Moreover, mixing CeO2 nanoparticles with hydrophobic fumed SiO2 in gas-phase DMC synthesis led to a doubling of DMC yield. This significant increase was attributed to the faster diffusion of water molecules away from the catalyst surface, facilitated by the hydrophobic SiO2. This study illustrates an effective dual strategy of enhancing oxygen vacancies and implementing in situ water removal to boost DMC production from CO2. The strategy can also be applied to other reactions impacted by water accumulation.