Hui Ma

Prof. Hui Ma

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 May 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
HMHui Ma
Hui Ma
KZKaitong Zheng
Kaitong Zheng
HJHao Jiang
Hao Jiang
HYHongpeng Yin
Hongpeng Yin
In this article, a family of dual-boost bridgeless five-level rectifiers with common-core inductors is proposed, which is composed of two coupled inductors, one bidirectional switch unit, and the dual-boost bridgeless power factor correction (PFC) rectifier. A bidirectional switch unit is embedded in the midpoint between the two capacitors and the bridge arm of the dual-boost bridgeless PFC (DBBL-PFC) to directly generate the five-level waveforms in each line cycle. The proposed topologies have the characteristics of lower voltage/current stresses and low total harmonic distortion. Additionally, the proposed five-level rectifiers employ a pair of common-core coupled inductors at the input side to replace the inherent independent inductors to improve the core utilization and the power density. First, the characteristics of the proposed topologies are analyzed and compared, and one of the topologies is taken as an example to illustrate its operating principle. Second, the modulation strategy with strong topology applicability and control system is designed for the proposed topologies. The advantage of the proposed pulsewidth modulation method is that it only needs to change the pulse distribution of the five-level topology to realize the five-level rectification, and the program debugging is simple. Then, the coupled inductors are designed, compared, and analyzed by the equivalent model in detail. Finally, a rated output of 1 kW/400 V experimental prototype is built, and the experimental results are presented to demonstrate the performance and effectiveness of the proposed topologies.

1 March 2016 in IET Power Electronics
Verified
Journal Article
Open access
PDF file
HMHui Ma
Hui Ma
YXYunxiang Xie
Yunxiang Xie
ZSZeyu Shi
Zeyu Shi
This study proposes an improved direct power control (DPC) strategy based on sliding mode control (SMC) with dual closed loop for the Vienna‐type rectifier to improve transient response during both start‐up and load step‐change periods and to guarantee stability in steady state. The inner power closed‐loop utilises SMC–DPC controller to directly regulate the required rectifier's control voltage without transforming to synchronous rotating coordinate reference frame or tracking phase angle of the grid voltage, which simplifies the control system. In addition, the outer loop employs a novel sliding mode controller to improve the dynamic performance of the dc output voltage and the instantaneous power. Finally, the dynamic and steady‐state performances of the grid current, dc output voltage, active/reactive power are experimentally investigated and compared with the conventional proportional–integral‐DPC scheme, both the simulation and the experimental results demonstrated the dynamic performance and stability of the proposed control scheme.

30 November 2020 in IEEE Access
Verified
Journal Article
Open access
HMHui Ma
Hui Ma
YLYun Lu
Yun Lu
KZKaitong Zheng
Kaitong Zheng
TXTianchuan Xu
Tianchuan Xu
The three-phase/switch Y-type two-level rectifier is widely used in the unidirectional power-flowing applications such as LED illumination, communication and uninterruptible power supply. This paper presents the working principle of three-phase/switch Y-type two-level rectifier, and proposes two simple and fast modulation techniques (12-sector SVPWM and simplified equivalent SVPWM) based on the virtual vectors. The reference vectors of the 12-sector SVPWM are synthesized by utilizing real basic vectors and virtual vectors linearly combined from these real vectors in a switching period. So the created virtual vectors can reduce the error of reference voltage synthesis, contributing to better input current performance, this paper proposes a simplified 12-sector equivalent SVPWM, and shows the novel three-phase modulation wave expressions and waveforms. The proposed simplified 12-sector equivalent SVPWM does not need the process of sector determination with reducing computational processing time which is attractive for digital implementation. Finally, performance of the proposed modulation methods for a Y-type two-level rectifier using a 5kW prototype is experimentally verified.

24 July 2023 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
HMHui Ma
Hui Ma
YPYu Pan
Yu Pan
YLYun Lu
Yun Lu
XCXi Chen
Xi Chen
YHYuehua Huang
Yuehua Huang
In this paper, a family of single phase three-level pseudo totem-pole rectifiers (STPTRs) is proposed. Compared with the conventional diode clamped three-level converter, the number of semiconductors in the proposed rectifiers is reduced, contributing to lower conduction losses. The proposed STPTRs employ the dual-inductor branch bridge arms working in conjunction with each other to provide a path for the input current, which means it may reduce the current flowing through the inductors effectively. The characteristics of a selected novel rectifier topology including its principles of operation, key waveform, and a power circuit design related analysis are presented. Meanwhile, the mathematical models between the voltage level characteristics of the bridge arm to ground and the switching pulse distribution is derived, and a unified pulse—width modulation for this family of STPTRs is presented. The double-layer carrier modulation technique with unified interval judgment condition can be transplanted to different topologies with the same switching devices. Finally, a 220V/1kW laboratory prototype is built to validate the feasibility of the proposed PFC rectifiers.

6 October 2023 in IEEE Access
Verified
Journal Article
Open access
TWTianyue Wang
Tianyue Wang
HMHui Ma
Hui Ma
WLWenjing Li
Wenjing Li
GMGuixi Miao
Guixi Miao
QZQingsong Zhao
Qingsong Zhao
YLYun Lu
Yun Lu
In this study, a novel family of single-phase, bridgeless, three-level power factor correction (PFC) topologies was proposed based on the embedded construction scheme. These technologies combined bridgeless PFC circuits and multilevel technology. These topologies are highly suitable for applications with high efficiency and high power density requirements. This family has six topologies. The derivation, operating principle, mathematical model, and circuit performance of the proposed topologies were analyzed. Furthermore, for this family of topologies, a four-carrier phase disposition pulse width modulation (FCPD-PWM) method and a system design method were proposed. Finally, an experimental prototype with an out-put power of 1 kW was designed. The circuit can work in the PFC mode under the rated working conditions and reflects the characteristics of three levels. The circuit can respond quickly and work normally under a variety of complex working conditions and can work in a diode rectification mode when the driving voltage signal is lost. The experimental results demonstrated the feasibility of the topology derived from the proposed embedded construction scheme and the effectiveness of the FCPD-PWM method for driving the proposed three-level conversion circuit.

6 January 2025 in Processes
Verified
Journal Article
Open access
PDF file
YHYuehua Huang
Yuehua Huang
YLYun Lu
Yun Lu
LFLiping Fan
Liping Fan
KXKun Xiang
Kun Xiang
HMHui Ma
Hui Ma
Fault arcs exhibit randomness, with current waveforms closely mirroring those of standard nonlinear load operations, posing challenges for traditional series fault arc detection methods. This study presents an improved detection approach using a lightweight convolutional neural network model, ShuffleNet V2. Current data from household loads were collected and preprocessed to establish a comprehensive database, leveraging one-dimensional convolution and channel attention mechanisms for precise analysis. Experimental results demonstrate a high fault arc detection accuracy of 97.8%, supporting real-time detection on the Jetson Nano embedded platform, with an efficient detection cycle time of 15.65 ms per sample. The proposed approach outperforms existing methods in both accuracy and speed, providing a robust foundation for developing advanced fault arc circuit breakers.