Three-dimensional microstructures of bainitic ferrites and prior austenite grains (PAGs) were observed in the initial stage of upper bainite transformation by using a serial sectioning technique and orientation analysis by electron back scattering diffraction (EBSD). The formation site of the bainitic ferrites was quantitatively evaluated by three-dimensional observation. It was revealed that the bainitic ferrites mainly form at the planes rather than the edges of prior austenite grain boundaries (PAGBs) and form on both sides of the PAGB plane. The effect of the orientation of the PAGs on the formation of the bainitic ferrites was also investigated. The bainitic ferrite has a small misorientation with the bainitic ferrite in the adjacent PAG across the PAGB. It is suggested that the reason for the formation of bainitic ferrite at the planes rather than edges of PAGBs is because it is difficult for bainitic ferrite to have a small misorientation with the bainitic ferrites in adjacent PAGs at edges.
A crystallographic analysis was conducted of the upper bainite nucleated at the austenite grain boundary in Fe-0.6C-0.8Mn-1.8Si (in mass %) steel by the EBSD analysis. The effect of the character of the prior austenite grain boundary (PAGB) on the formation of upper bainite was investigated from several perspectives: PAGB plane, grain boundary energy, and so on. BFs form on both sides of the high-angle PAGBs, while BFs do not form at twin boundaries. It is suggested one of the reasons for the suppression of BF formation at twin boundaries is the lower grain boundary energy. At high-angle grain boundaries, there is no difference in the potency for BFs’ nucleation between the tilt-like PAGBs and twist-like PAGBs, and the formation of BF is not affected by the angle between the rotation axis, the PAGB plane, and grain boundary energy. The variant selection of BFs was investigated. The BFs pair, whose misorientation across the PAGB is small, is formed preferentially. When several variant pairs can form having small misorientation across the PAGB, the variant pair that can reduce the elastic strain energy preferentially forms to accommodate the shape strain.
A crystallographic analysis was conducted on the lower bainite formed at the austenite grain boundary in Fe-0.6C-0.8Mn-1.8Si (in mass%) steel at the initial stage of transformation. The variant selection and the effect of the character of the austenite grain boundary on the formation of lower bainite were investigated from several perspectives: the character of the prior austenite grain boundary (PAGB), the crystal orientation relationship between the bainitic ferrite (BF) and the adjacent prior austenite grain (PAG) across the PAGB, and the geometrical relationship between the BF and PAGB plane. BFs do not form at twin boundaries but form at high-angle grain boundaries. The effect of the orientation of the adjacent PAG across the PAGB is not dominant in the case of lower bainite formation, while the PAGB plane strongly affects the formation and the variant selection of BF. BF tends to form when its habit plane or shape deformation direction is nearly parallel to the PAGB plane. It is suggested that the formation of BF, whose HP is parallel to the PAGB, is favored from the perspectives of the interfacial energy, the elastic strain energy, and the plastic accommodation.