The aerospace electro-hydraulic servo simulator is used to simulate the air load received during flight, and is used for the performance test and acceptance test of aerospace servo actuators on the ground. The force loading accuracy of the load simulator is an important assessment index. Because the loading system and the actuator system to be tested are coupled together, the free displacement of the system to be tested during loading will bring huge disturbance to the loading system, thus how to suppress external interference has always been a hot issue in the control field. This paper addresses this issue under the influence of nonlinear friction and uncertain external disturbance. First, the exact mathematical model of the system is derived, and the characteristics of the system are described by the state equations. Second, in order to obtain the relevant parameters in the controller, the system parameters are identified. Third, the parameter adaptive sliding mode force control based on the reaching law is proposed, and the performance of the control algorithm is analyzed theoretically. Finally, the new control method is applied in the aerospace electro-hydraulic servo simulator, and the results show that the new control algorithm can suppress the external interference by 95% or more, and the control accuracy is more than 97%, which fully demonstrates the effectiveness of the control method.
10 February 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
In spacecraft, facing different loading conditions of subsystems, especially of permanent magnet synchronous motor (PMSM) system, the bus voltage has large fluctuation, which will seriously affect the power quality of the spacecraft combined power system. Therefore, it is necessary to introduce a bidirectional DC–DC converter to suppress the fluctuation of the bus voltage. Aiming at the need of controlling the bidirectional DC–DC converter, a hybrid model linearization predictive control (HMLPC) algorithm is proposed. According to the strong nonlinear hybrid characteristics of the bidirectional DC–DC converter, an optimal linear approximation model at the sampling point is established using the Jacobian matrix, based on which a piecewise affine (PWA) model is established for Buck and Boost mode, and then, a hybrid linearization predictive model is constructed. Ultimately, by introducing a two-period PWA and multistep prediction strategy, proposing a prediction error, and solving the constrained finite time optimization control (CFTOC) problem online, an optimal control law is derived. In addition, a stability analysis is provided for the proposed control algorithm. In this article, a simulative validation and a comparative analysis are presented; moreover, a combined power test platform is built to validate the proposed control algorithm. Both simulation and experiment results show that the HMLPC algorithm can effectively suppress the fluctuation of bus voltage and enhance the anti-interference ability of the system.
Multi-drone collaborative perception aims to address single-drone viewpoint limitations. The existing matching and association methods based on visual features and spatial topology rely heavily on detection, making it challenging to associate targets under imperfect detection conditions. To address this issue, a Graph-Based Target Association Network (GTA-Net) is proposed to utilize graph matching to associate the key objects before affine transforming and matching both detected and undetected targets. The Key Object Detection Network (KODN) finds the key object that is more likely to be a True Positive and more important. The Graph Feature Network (GFN) treats the key objects as graph nodes and extracts the graph feature. The Association Module utilizes graph matching to associate the top-k-like matching objects and iterable affine transformation to associate all objects. The experiment results show that our method achieved a 42% accuracy improvement on the public dataset. The ablation experiments under imperfect detection simulation demonstrate robust performance.
This paper addresses the force-tracking problem of aerospace electro-hydraulic load simulators under the influence of high inertia, large loads, and a strong coupling force disturbance. An accurate mathematical model is initially derived to describe the characteristics of the load simulator system, the cause of the surplus force, and the strong phase lag due to large inertia. In order to overcome the position interference of the system and the large phase lag problem, a terminal sliding mode control strategy based on the modified fast double-power reaching law is proposed, based on the accurate mathematical model. This control strategy effectively suppresses the chattering problem of the sliding control and implements the finite time convergence of the system through the design of the reaching law and terminal sliding surface, ensuring the robustness of the system and the accuracy of the force-tracking problem. Finally, a comparison of the simulation and experimental results based on the design of different strategy controllers is performed to verify the effectiveness of the control strategy and system adaptability.
18 July 2022 in IEEE Transactions on Aerospace and Electronic Systems
With rapid developments in aerospace science and technology, higher requirements are being placed on the control accuracy of aircraft. As the power source of aircraft servo systems, the power quality of the combined power supply system directly affects the control accuracy of aircraft. Therefore, it is crucial to improve the performance of this combined power supply system. In this paper, a method based on non-singular terminal sliding mode control (NTSMC) is proposed to suppress the DC bus voltage fluctuation of the combined power supply system, which is caused by servo motor loads. Firstly, the mutual influences of the servo motor running state and the DC bus voltage on one another are analysed. Then, the mathematical model of the DC bus voltage regulation module, based on a bidirectional DC-DC converter and ultracapacitor, is established. The NTSMC algorithm is adopted, and the sliding mode surface and control law are designed to suppress the DC bus voltage fluctuation of the combined power supply system. Finally, simulation and experimental research are carried out to verify the effectiveness of the method. The results show that the proposed method can effectively suppress the fluctuation of DC bus voltage, and that NTSMC is superior to the traditional PID control method for aerospace combined power supply systems.
2 February 2019 in Journal of Vibration and Control
Owing to the control system being repetitive and nonlinear, a time-varying pilot factor control algorithm based on iterative learning control is proposed. The convergence of the TPF-ILC control algorithm is mathematically proven and the sufficient conditions are given. Thereafter, the initial state issue of iterative learning is explored, which is the critical issue of iterative learning control. The convergence of the system’s control error and the initial state of every single period have been mathematically proved by using continuous and repetitive properties of the system, even if the initial states of every single iterative learning period are not strictly the same. At the end of this paper, the TPF-ILC algorithm is applied in a hydraulic servo control system, and experimental results indicate the effectiveness and practicability of the TPF-ILC algorithm.