A reliable train‐to‐ground wireless communication system is proposed for the foundation of the safe operation of Hyperloop. The wireless channel characteristics of Hyperloops at millimetre‐wave (mmWave) bands are analysed based on the ray‐tracing method. Considering the reflection paths and line of sight path, the channel transfer function expression is derived for each multipath and then the channel impulse response is obtained. On this basis, the investigation and analysis of the large‐scale and small‐scale channel characteristics, including the path loss, shadow fading, delay spread, and angular spread of 4 different mmWave frequency carriers, that is, 28/38/45/60 GHz, are conducted. Simulation results show that the path loss increases as the frequency increases while the time delay spread and angular spread almost keep unchanged. The relevant research results will contribute to the design of future Hyperloop wireless communication systems.
6 August 2022 in Journal of Circuits, Systems and Computers
Hyperloop is envisioned as the next generation of railway transportation mode, which can proceed at a speed of more than 1000 km/h. The safe operation of the Hyperloop depends heavily on the support of a stable communication system. In this paper, we propose a 3D channel model in vacuum tube scenarios based on the ray-tracing method. The reflection paths and line of sight (LoS) paths are considered. We derive the channel transfer function (CTF) expression for each multipath, and then the channel impulse response (CIR) is obtained. On this basis, the large-scale and small-scale channel characteristics, including path loss, shadow fading, correlation coefficient, delay spread, and angular spread, are investigated and analyzed. Simulation results show that the proposed channel model can characterize the wireless channel in the Hyperloop scenarios in detail, and the results maintain a high level of symmetry between the range of 0–250 m and 250–500 m. The relevant research results will contribute to the design of future Hyperloop wireless communication systems.
This paper proposes an evolutionary modeling method of scattering clusters based on Geometric-Based Stochastic Modeling (GBSM). In the single-bounce scenario of vacuum pipeline maglev train communication, the dynamic generation and extinction process and statistical behavior of multiple clusters at high speed are analyzed. The model abstracts the multipath component into a cluster structure. By iteratively updating the channel state and the birth and death cluster information after initialization, a dynamic model of the evolution process of scattering clusters in time-varying channels is constructed, which depicts the time evolution process of multipath clusters. Under the framework of GBSM, the correlation statistical characteristics of the scattering cluster birth and death process are further derived, and analytical integral form expression of the channel time autocorrelation function (ACF) is theoretically solved. The simulation results reveal the inherent law of channel time-varying characteristics under the joint action of high-speed train operation and closed pipe structure, and the results show that the proposed method can effectively capture the transient dynamic characteristics and long-term statistical trends of multipath clusters. The proposed model provides a practical basis for channel modeling in vacuum tube maglev wireless communication systems.
9 May 2022 in International Journal of Antennas and Propagation
Multiple-input and multiple-output (MIMO) technology can not only provide huge data rates but also overcome the severe propagation attenuation effect, especially in millimeter-wave (mmWave) bands by utilizing beamforming. The nonreciprocal beam is a novel transmission pattern, which indicates that transceivers adopt asymmetrical beamwidths. Such a special pattern can achieve fast beam alignment and alleviate equipment costs. Thorough knowledge of the corresponding wireless channel is pivotal to the system design and optimization, which remains to be investigated. In this paper, we first propose a 3-dimensional (3-D) channel model based on ray-tracing, which is capable of reflection simulation. Based on this model, the ray-based beamforming mechanism is illustrated. The angular distribution is pivotal to beam channel modeling and characterization since transceiver beams filter rays in the angular domain. Then, we conduct an omnidirectional antenna-based channel simulation in an urban macro-cell scenario via the ray-tracing platform. On this basis, we focus on the distribution of the quasiangles, i.e., angles between departure/arrival reflected rays and the line-of-sight (LoS) path. We find that gamma distribution is a better option to fit the quasiarrival angular distribution than the von Mises distribution. Furthermore, to characterize the relationship between quasiangles of departure (AoD) and quasiangles of arrival (AoA), the Gaussian mixture model (GMM) is adopted and the expectation-maximization (EM) algorithm is used to estimate the unknown parameters of GMM. Our findings provide useful insights to beam channel modeling, which should take the joint angular distribution into consideration.
1 August 2025 in IEEE Transactions on Vehicular Technology
Satellite internet has been widely recognized as a key component of future integrated space-air-ground networks in recent years. As the scale of satellite internet expands, the frequency resources available for satellite communication are becoming increasingly scarce. In integrated space-air-ground networks, the frequency sharing between satellite networks and terrestrial cellular networks is an important trend. However, this inevitably leads to severe co-frequency interference (CFI) with characteristics of aggregation and time-varying. In this paper, an analysis model for time-varying aggregate interference is proposed. The time-varying probability distribution function (PDF) of CFI is analyzed in several co-existence scenarios, and the interference sources are modeled to calculated the individual interference as well as the aggregate interference. Through simulation, the characteristics of each type of CFI are simulated and analyzed, and the simulation results are also validated, demonstrating the accuracy of the proposed model.