This paper proposes a clothoid-curve-based trajectory tracking control method for autonomous vehicles to solve the problem of tracking errors caused by the discontinuous curvature of the control curve calculated by the pure pursuit tracking algorithm. Firstly, based on the Ackerman steering model, the motion model is constructed for vehicle trajectory tracking, Then, the position of the vehicle after the communication delay of the control system is predicted as the starting point of the clothoid control curve, and the optimization interval of the curve end point is determined. The clothoid control curves are calculated, and their parameters are verified by the vehicle motion and safety constraints, so as to obtain the optimal clothoid control curve satisfying the constraints. Finally, considering the servo system response delay time of the steering system, the steering angle target control value is obtained by previewing the curvature of the clothoid control curve. The field experiment is conducted on the test road, which consists of straight, right-angle turns and lane-change elements under three sets of speed limitations, and the test results show that the proposed clothoid-curve-based trajectory tracking control method greatly improved the tracking accuracy compared with the pure pursuit method; in particular, the yaw deviation is improved by more than 50%.
Topological maps generated in complex and irregular unknown environments are meaningful for autonomous robots’ navigation. To obtain the skeleton of the environment without obstacle polygon extraction and clustering, we propose a method to obtain high-quality topological maps using only pure Voronoi diagrams in three steps. Supported by Voronoi vertex’s property of the largest empty circle, the method updates the global topological map incrementally in both dynamic and static environments online. The incremental method can be adapted to any fundamental Voronoi diagram generator. We maintain the entire space by two graphs, the pruned Voronoi graph for incremental updates and the reduced approximated generalized Voronoi graph for routing planning requests. We present an extensive benchmark and real-world experiment, and our method completes the environment representation in both indoor and outdoor areas. The proposed method generates a compact topological map in both small- and large-scale scenarios, which is defined as the total length and vertices of topological maps. Additionally, our method has been shortened by several orders of magnitude in terms of the total length and consumes less than 30% of the average time cost compared to state-of-the-art methods.
With the increasing application of dual-PTZ (Pan-Tilt-Zoom) cameras in intelligent unmanned systems, research regarding their calibration methods is becoming more and more important. The intrinsic and extrinsic parameters of dual-PTZ cameras continuously change during rotation and zoom, resulting in difficulties in obtaining precise calibration. Here, we propose a general calibration method for dual-PTZ cameras with variable focal length and posture under the following conditions: the optical center of the camera does not coincide with the horizontal and pitch rotation axes, and the horizontal and pitch rotation axes are not perpendicular to each other. We establish a relationship between the intrinsic and extrinsic parameters and the feedback parameters (pan, tilt, zoom value) of dual-PTZ cameras by fitting and calculating previous calibration results acquired at specific angles and zoom values using Zhang’s calibration method. Subsequently, we derive the intrinsic and extrinsic parameter calculation formula at arbitrary focal length and posture based on the camera’s feedback parameters. The experimental results show that intrinsic and extrinsic parameters computed using the proposed method can better meet precision requirements compared with the ground truth calibrated using Zhang’s method. The average focal length error is less than 4%, the cosine similarity of the rotation matrix between the left and right cameras is more than 99.8%, the translation vector error is less than 1%, and the recalculated Euler angle errors are less than 1 degree. Our work can quickly and accurately obtain intrinsic and extrinsic parameters during the use of the dual-PTZ camera.
Path planning plays a crucial role in the execution of pursuit tasks for multiple unmanned ground vehicles (multi-UGVs). Although existing popular path-planning methods can achieve the pursuit goals, they suffer from some drawbacks such as long computation time and excessive path inflection points. To address these issues, this paper combines gradient descent and deep reinforcement learning (DRL) to solve the problem of excessive path inflection points from a path-smoothing perspective. In addition, the prioritized experience replay (PER) method is incorporated to enhance the learning efficiency of DRL. By doing so, the proposed model integrates PER, gradient descent, and a multiple-agent double deep Q-learning network (PER-GDMADDQN) to enable the path planning and obstacle avoidance capabilities of multi-UGVs. Experimental results demonstrate that the proposed PER-GDMADDQN yields superior performance in the pursuit problem of multi-UGVs, where the training speed and smoothness of the proposed method outperform other popular algorithms. As a result, the proposed method enables satisfactory path planning for multi-UGVs.
30 October 2025 in Journal of Intelligent & Robotic Systems
To address the low efficiency and poor robustness of robot plug-in charging in unstructured environments, this paper proposes a method for plug-in autonomous charging via a wheeled mobile manipulator in unstructured environments. First, a two-stage paradigm target recognition and positioning algorithm named You Only Look Once version 8 (YOLOv8) and Point Pair Features (PPF) pose estimation is constructed based on YOLOv8 and PPF. By integrating 2D image detection and 3D point cloud processing, it can quickly and accurately recognize and locate charging guns in complex environments. Then, according to the application characteristics of unstructured scenarios, an integrated system of the wheeled mobile manipulator is designed and verified through simulation. Finally, based on the custom-developed wheeled mobile manipulator platform, plug-in autonomous charging experiments are carried out in unstructured scenarios. The results show that in three typical experimental scenarios, namely normal illumination without occlusion, dim light with slight occlusion, and dark with large-area occlusion, the method proposed in this paper can achieve rapid recognition and positioning of the charging gun, meeting the precision requirements that the angle error of the charging gun pose estimation does not exceed \(10^{\circ }\) and that the distance error does not exceed 15mm; this demonstrates the effectiveness and robustness of the designed plug-in autonomous charging method for the wheeled mobile manipulator.
5 November 2026 in Biomimetic Intelligence and Robotics