In this study, we present the design of a photonic crystal (PC) structure with a hexagonal lattice, where adjustments to the PC unit cell symmetry reveal an all-angle self-collimation (SC) effect. By optimizing opto-geometric parameters, such as the rotational angle of auxiliary rods and adjacent distances, we analyze the SC property in detail, leveraging group velocity dispersion (GVD) and third-order dispersion (TOD) characteristics. We also investigate the relationship between symmetry properties and their influence on dispersion characteristics. Through symmetry manipulation, we gain a comprehensive understanding of the underlying mechanisms governing light collimation and confinement in the proposed configurations. The PC structure with a C1 symmetry group exhibits all-angle SC effect within the range of a/λ = 0.652 and a/λ = 0.668 normalized frequencies, with a bandwidth of Δω/ωc=2.4% Further breaking the symmetry, transforming from C1 to C2 group symmetry enhances the SC bandwidth to Δω/ωc=6.5% and reveals the perfect linear equi-frequency contours (EFC) at two different frequency bands: all angle SC between a/λ = 0.616 and a/λ = 0.344 normalized frequencies in the 4th transverse magnetic (TM) band and between a/λ = 0.712 and a/λ = 0.760 in the 5th TM band. Here, GVD and TOD values of the TM 4th band vary between 7.3 (a/2πc2)–254.3 (a/2πc2) and 449.2 (a2/4π2c3)–1.3×105 (a2/4π2c3), respectively. Also, GVD and TOD values of the TM 5th band vary between 182.5 (a/2πc2)–71.3 (a/2πc2) and −24380(a2/4π2c3)–−9619 (a2/4π2c3) values, respectively. Additionally, we propose a composite/hybrid PC structure resembling C2 group symmetry, where two auxiliary rods are replaced by rectangular photonic wires with the same refractive index and width equal to the diameter of auxiliary rods. This hybrid structure exhibits an all-angle SC effect with an operating bandwidth of Δω/ωc=11.7%, which displays near-zero GVD and TOD performance and offers enhanced robustness against potential fabrication precision issues.
28 May 2015 in Microwave and Optical Technology Letters
This study proposes the use of a low-symmetry hexagonal photonic crystal (LSHPC) incorporating Kerr-type nonlinearity to enhance self-collimation. The equifrequency contours (EFCs) of a C2-symmetric LSHPC composed of nonlinear LiNbO3 rods are analyzed as a function of the nonlinear refractive index. The self-collimation characteristics, transmission spectrum, group velocity dispersion (GVD), and third-order dispersion (TOD) are investigated using the Plane Wave Expansion (PWE) and Finite Difference Time Domain (FDTD) methods. The results demonstrate that increasing the nonlinear index leads to a significant flattening of the EFCs, which enhances self-collimation performance. Furthermore, symmetry-lowering perturbations improve beam confinement and enable all-angle self-collimation. These findings highlight the potential of Kerr-type nonlinear photonic crystals for integrated photonic circuits requiring precise control over light propagation.
Photonic Crystal Circuits have been widely investigated for various optoelectronics device applications. And the gratings in photonics devices are indispensable tool, which is very common for light manipulation. In this study, an interference grating structure formed by Gaussian beam interferences in photonic crystal waveguide such that having Kerr type nonlinearity is proposed and its transmission characteristics are investigated. Finite-Difference Time-Domain method is used to analyze the device characteristics. According to simulation results, the interference grating has shown special transmission characteristics that can bring tunability for photonic crystal devices. This can be an effective method for controlling optical signals in the photonic crystal for all optical switching/routing applications as a part of add/drop multiplexing.