Single-mode lasing in whispering-gallery mode (WGM) microresonators is challenging to achieve. In bottle microresonators, the highly non-degenerated WGMs are spatially well-separated along the long-axis direction and provide mode-selection capability. In this work, by engineering the pump intensity to modify the spatial gain profiles of bottle microresonators, we demonstrate a simple and general approach to realizing single-mode WGM lasing in polymer bottle microresonators. The pump intensity is engineered into an interference distribution on the bottle microresonator surface. By tuning the spacing between axial positions of the interference pump patterns, the mode intensity profiles of single-bottle WGMs can be spatially overlapped with the interference stripes, intrinsically enabling single-mode lasing and selection. Attractive advantages of the system, including high side-mode suppression factors >20 dB, large spectral tunability >8 nm, low-lasing threshold and reversible control, are presented. Our demonstrated approach may have a variety of promising applications, ranging from tunable single-mode lasing and sensing to nonlinear optics.

We give a brief review of the developments in terahertz time-domain spectroscopy (THz-TDS) systems and micro-cavity components for probing samples in the University of Shanghai for Science and...

In this paper, a swastika-shaped ultra-broadband metamaterials absorber is proposed. The designed absorber can be fabricated with the polylactic acid (PLA) by 3D printing, and packaged after filling with water. The absorber can achieve greater than 90% absorption in the frequency band of 9.3-49.0 GHz, with a relative bandwidth of 136%, which has been well demonstrated in the microwave experiment. Moreover, it also performs well at wide angles of incidence and the absorption efficiency has almost no obvious changes over the water temperature range of 0-100°C. The absorber proposed in this article benefits from ultra-wideband absorption, low cost and environment-friendly materials, it can be applied in the fields of electromagnetic stealth and electromagnetic energy harvesting.

To assess the feasibility and safety of magnetic-controlled capsule endoscopy (MCE) system for examination of human stomach. This pilot study enrolled 34 healthy volunteers. All subjects swallowed the MCE and gas-producing powder for gastric distention. An external robot was used to generate magnetic field to manipulate MCE inside the stomach. The primary measurements included safety, gastric preparation, maneuverability and visualization of gastric mucosa. Gastric preparation and examination was well accepted by subjects and there were no adverse events. The examination in the stomach takes 43.8±10.0min (27–60). The cleanliness was evaluated as good in the 30 (88.2%) subjects and as moderate in 4 (11.8%) subjects. The distention of gastric cavity was evaluated as good in the 29 (85.3%) subjects and moderate in 5 (14.7%) subjects. Maneuverability of the MCE to movements of the guidance magnet robot was graded as good in 29 (85.3%) subjects and moderate in 5 (14.7%) subjects. More than 75% gastric mucosa was visualized in 27 (79.4%) subjects and 50% to 75% in 7 (20.6%) subjects. Visualization of the gastric cardia, fundus, body, angulus, antrum and pylorus was subjectively assessed as complete in 82.4%, 85.3%, 100.0%, 100.0%, 100.0% and 100.0%, respectively. Polyp and erosive lesions were found in 7 subjects. Magnetic-controlled capsule endoscopy used for examination of the human stomach is feasible and safe.